S550 LED Interior/Exterior list

[Manders Mustang]

Yeah, agree that the interior led's are pretty awesome.

Nice cheap and cheerful mod

Sponsored

 

[Stark]

Got the glove box bulb out fine but just spent the last 20 mins trying to fit the LED bulb in and the little shit won't go in.....losing patience!!

 

[Stark]

Now it appears I have blown a fuse. Anyone know what fuse it is for the glove box and vanity lights because now they are not working?!

 

[Stark]

Ok so I have found the fuse blown. Bottom left 10A. I swapped it over with the bottom right 10A to make sure everything still worked on glove box circuit (glove box and vanity mirrors). I have now left that fuse where it is but now my question is, what is the bottom right 10A fuse for?

Oh and there is an easier way to get the glove box bulb out. Lift the whole fitting up at the back so it sits at 45degrees and then pull it out

 

[Manders Mustang]

Ok so I have found the fuse blown. Bottom left 10A. I swapped it over with the bottom right 10A to make sure everything still worked on glove box circuit (glove box and vanity mirrors). I have now left that fuse where it is but now my question is, what is the bottom right 10A fuse for?

Oh and there is an easier way to get the glove box bulb out. Lift the whole fitting up at the back so it sits at 45degrees and then pull it out

Nice find! Not sure about the other fuse, will have to look in the book, bearing in mind they're not very well labeled for the most part, who knows ;)!

 

[Stark]

Nice find! Not sure about the other fuse, will have to look in the book, bearing in mind they're not very well labeled for the most part, who knows ;)!

Luckily I started testing a couple of things before packing up and found out the bottom right 10A fuse is for the electric Windows so I had to swap them back again because I can live without internal lights for now but not the Windows lol

After the faff with this I have now run out of time to swap the sidelights out and I am not in the mood now anyway haha

 

[Manders Mustang]

Luckily I started testing a couple of things before packing up and found out the bottom right 10A fuse is for the electric Windows so I had to swap them back again because I can live without internal lights for now but not the Windows lol

hahaha! you donut :frusty:!

There's a link for fuses on the first page

 

[Stark]

hahaha! you donut :frusty:!

There's a link for fuses on the first page

Feel like one already managing to blow a fuse but to then go out and then find out the windows don't work because of swapping the fuses over would have taken me past doughnut stage lol

Yeah just ordered all the fuse types and 2 x 10A fuses for good measure hopefully they don't take long to arrive

 

[Manders Mustang]

Feel like one already managing to blow a fuse but to then go out and then find out the windows don't work because of swapping the fuses over would have taken me past doughnut stage lol

Yeah just ordered all the fuse types and 2 x 10A fuses for good measure hopefully they don't take long to arrive

Pull the blastic light housing out of the connector when doing the boot... ;)!

Hopefully fixing my dodgey passanger window that doesn't slide down quick enough isn't as simple as that. as when my car goes back in, that's being done!

 

[SteveS]

Oh and there is an easier way to get the glove box bulb out. Lift the whole fitting up at the back so it sits at 45degrees and then pull it out

Could have told you that ;)
http://www.mustang6g.com/forums/showthread.php?p=1310217&highlight=Bulb#post1310217
Still found i had to take the whole fitting apart to get the blighter changed...

Thanks for the fuse info though. Living in fear of those blowing.

 

[Manders Mustang]

Could have told you that ;)
http://www.mustang6g.com/forums/showthread.php?p=1310217&highlight=Bulb#post1310217
Still found i had to take the whole fitting apart to get the blighter changed...

Thanks for the fuse info though. Living in fear of those blowing.

Just remove the boot light from the connector, and you wont blow it

 

[Stark]

Could have told you that ;)
http://www.mustang6g.com/forums/showthread.php?p=1310217&highlight=Bulb#post1310217
Still found i had to take the whole fitting apart to get the blighter changed...

Thanks for the fuse info though. Living in fear of those blowing.

Dam haha

Just remove the boot light from the connector, and you wont blow it

And I would advise removing the glove box fitting now as well lol

 

[Manders Mustang]

Dam haha



And I would advise removing the glove box fitting now as well lol

Really? i didn't remove mine, and didn't blow a fuse - but it was a pain in the arse to get to/put in put out, took me about 5-10mins of fiddling with tweezers!

 

[slowhand99]

Just remove the fuse before you start. I even blew one changing the vanity bulbs so it's easiest to do it first, once.

 

[Manders Mustang]

Just remove the fuse before you start. I even blew one changing the vanity bulbs so it's easiest to do it first, once.

Removing the fuse could be stupid though?

LED's only work a 'certain way' in the hubs, how you gonna know which way it's working? Might be long winded.


But I suppose, if it's the longest way and saves you needing a fuse, could be best !

Sponsored