19x10 or 20x10 square...?

[Felixthecat]

My s550 is my daily driver and I'm looking to get away from the staggered (PP) and go to squared for additional miles and rotation. I'm leaning more towards the 19's, but wondering if anyone has a similar setup/situation and could provide feedback. I'm at stock PP ride height and have no plans on lowering the car.

Thanks for all your help!


Sent from my iPhone using Tapatalk

Sponsored

 

[Need4SpeedMotors]

Ive done a number of squares for both 19s and 20s, all depends on the wheel your after, size they come in and how you imagine your setup in your mind.

Def down to help out.

 

[madsedan]

I'm doing this over the next month or so an I am going square set-up with 19x9.5 with 275/40 all around for better/even wear with easy tire rotations.

 

[Shouldhavegotthegt]

I like 20s more than 19s. I think they fill the wheel well better. IMO tires larger than 35 look too tall. There are a few guys who pulled of some 35 on 19s but you have to go real low to do so.

Here's mine. MMD Holgen 20x10 45 offset with Nitto 275/35. I just lowered it this weekend with Steeda progressives but haven't taken pics yet.

 

[Need4SpeedMotors]

It all comes down to personal preference really.

 

[Built4Speed]

I like 20s more than 19s. I think they fill the wheel well better. IMO tires larger than 35 look too tall. There are a few guys who pulled of some 35 on 19s but you have to go real low to do so.

Here's mine. MMD Holgen 20x10 45 offset with Nitto 275/35. I just lowered it this weekend with Steeda progressives but haven't taken pics yet.

Pics please!!!

 

[Shouldhavegotthegt]

 

[smdandb2]

I'm going with 20s for my next set.

The reason for me was tires. 285/30/20 is cheaper than 285/35/19.

285/35/19 seems to be a common Porsche size, and with that comes the Porsche tax.

 

[Need4SpeedMotors]

I'm going with 20s for my next set.

The reason for me was tires. 285/30/20 is cheaper than 285/35/19.

285/35/19 seems to be a common Porsche size, and with that comes the Porsche tax.

Aggressive fitment of course right lol .

 

[Built4Speed]

Did you use the stock factory TPMS sensors with stock length valve stems on the front wheels? With the placement of the valve stem hole I'm concerned with caliper interference with the 20x10 Holgens on the front. I haven't gotten the chance yet to get mine test fitted and installed.

BTW, those Holgens look great!!! I have a magnetic too but black Holgens 20x10 squared.

 

[ronnieb1958]

how 'bout a side shot?

 

[Quiksilver15]

Personal preference man, I'm running 19*10 Boss 302S wheels with 285/35r19 tires square on my car.

 

[smdandb2]

Aggressive fitment of course right lol .

20x10 +30 square, should be fairly aggressive. Not as aggressive as some, but more aggressive than most.

That's if the wheels ever actually leave Japan.

 

[Need4SpeedMotors]

20x10 +30 square, should be fairly aggressive. Not as aggressive as some, but more aggressive than most.

That's if the wheels ever actually leave Japan.

Yep, if you want pop a 5 mm spacer upfront, I do a 20x10 Et 25 upfront on some setups and it works great.

 

[Quiksilver15]

Yep, if you want pop a 5 mm spacer upfront, I do a 20x10 Et 25 upfront on some setups and it works great.

You make me feel like a pansy with my +42 square setup haha. Next set of wheels will be more aggressive.

Sponsored