Anyone running Advanti DST HY Hybris?

[FusionGT]

With stock suspension setup or a 1" drop, I m interested to see the 19x9.5 in the front with 20 or 25 mm spacers. It would be sweet!

Hmmm. That would make the wheels stick out well past the fenders. A 5mm would work

Sponsored

 

[z06psi]

The 19x9.5 with a 6 mm spacer brings them to the edge of the fender. 25mm would be stacking far out.

 

[racer24crm]

The 19x9.5 with a 6 mm spacer brings them to the edge of the fender. 25mm would be stacking far out.

Since these wheels don't have any pockets in the back, does it make it more difficult to add spacers that need to be bolted to the hub? You mentioned you need 16mm spacers for the front before and I would imagine they would need to be bolted and have their own studs.

 

[z06psi]

Since these wheels don't have any pockets in the back, does it make it more difficult to add spacers that need to be bolted to the hub? You mentioned you need 16mm spacers for the front before and I would imagine they would need to be bolted and have their own studs.

There are no pockets cause there is nothing there. Yes I run 16mm spacers with their own studs and they fit fine. The 6mm for the rears are just flat spacers.

 

[racer24crm]

There are no pockets cause there is nothing there. Yes I run 16mm spacers with their own studs and they fit fine. The 6mm for the rears are just flat spacers.

Awesome. Thanks for sticking with this thread and helping all of us out with these questions, man. :cheers:

 

[z06psi]

That is what boards are supposed to be for. Unfortunately drama gets in as well.

 

[Sasuketr]

The 19x9.5 with a 6 mm spacer brings them to the edge of the fender. 25mm would be stacking far out.

Can you fit the caps on with 6 mm spacers on the front?

 

[z06psi]

Can you fit the caps on with 6 mm spacers on the front?

Never tried. I never wanted a square setup.

 

[Joker]

Bit late lol, but here's what they look on an orange car. totally worth it. lost about 10lbs per wheel compared to stock 18s. And in case people were still curious: 19x8.5/9.5 both weight 19.5 according to my scale. With Firehawk Indys they weight around 46lbs, and stock 18s weight 56lbs. Steering feels amazing, whole car feels like it lost more than just 40lbs. The fronts could use spacers, rears might not. N i know the rotors and calipers look hideous lol

 

[racer24crm]

looks good. post some daytime pics.

 

[StoplightWarrior]

I have these on my 2016 GT and they're sweet

 

[Aarron_M]

I still can't believe we haven't seen anyone pull a square setup with these. I'm so close to saying fuck it, and pulling the trigger. I'll just use the OEM PP tires until they're shot, then upgrade to a 275-285 all around.

I sent a PM to getyourwheels...awaiting pricing.

I think the 5mm spacer, or hammer in the dust cap will resolve the center cap issue.

 

[racer24crm]

I still can't believe we haven't seen anyone pull a square setup with these. I'm so close to saying fuck it, and pulling the trigger. I'll just use the OEM PP tires until they're shot, then upgrade to a 275-285 all around.

I sent a PM to getyourwheels...awaiting pricing.

I think the 5mm spacer, or hammer in the dust cap will resolve the center cap issue.

Damn, I was getting ready to order my wheels next week but if you are gonna be the guinea pig for a square setup I may hold out to see the results. Let us know what you do.

 

[madsedan]

I just spoke to a Tire Rack rep this morning that verified 9.5 fits all four corners. I am about to order a set to go with my new 275/40 HTR Z3's.

 

[daltron]

I just wish these came in 10" or even dreaming for 11".

Sponsored