GT350 Valence Will NOT Fit Roush Quad-Tips

[cerv14]

They're clean with no leaks... just a little sloppy on the welds.

Sponsored

 

[Khyber]

no offense but I wouldn't be happy with that way that work was done. even if it is under the car.

 

[Sixth]

damn...why does it look like your pipes are on the ground almost? lol

 

[z06psi]

Da fuq? That is some shit workmanship.

Sent from my SM-N910V using Tapatalk

 

[Evolvd]

I'm no welding expert but those welds look horrendous.

 

[cerv14]

The welds aren't pretty, but they are structurally sound.

A friend of mine and I will be grinding them down and polishing them out to clean it up a bit. Thanks for your concern, guys.


Sent from my iPhone using Tapatalk

 

[byklin]

agree that the welds aren't pretty but good to see that it will work! do the dual pipes line up perfectly to the valence exhaust tips? seems like its a bit offset?

 

[cerv14]

agree that the welds aren't pretty but good to see that it will work! do the dual pipes line up perfectly to the valence exhaust tips? seems like its a bit offset?

Thanks! They're a bit off since the Roush tips sit about a 1/2" closer together than the FRPP tips. I'm not too concerned about it because even the GT350 tips are off sometimes. Which is why mine are painted black.


Sent from my iPhone using Tapatalk

 

[byklin]

Thanks! They're a bit off since the Roush tips sit about a 1/2" closer together than the FRPP tips. I'm not too concerned about it because even the GT350 tips are off sometimes. Which is why mine are painted black.


Sent from my iPhone using Tapatalk

Yeah I agree painting it black is a good idea. I'm not concerned about the alignment per say but I'm not concerned about the exhaust coming out and heating the rear valence? Like I don't want it to melt any parts or anything of that nature.

 

[Stage_3]

but I'm concerned about the exhaust coming out and heating the rear valence? Like I don't want it to melt any parts or anything of that nature.

Great point bro! I didn't even think of that. Hopefully it will be fine, but we shall see.

 

[cerv14]

For those that were asking - just the angle of the picture. The tips are a little off center, but they're well insulated by the built in tip on the valence. Plastic is safe from the heat.

Pictured is the inner tip.

Sent from my iPhone using Tapatalk

 

[Quiksilver15]

So where did you buy just the valance? I'm thinking of doing a custom magnaflow quad tip.

 

[cerv14]

So where did you buy just the valance? I'm thinking of doing a custom magnaflow quad tip.

You can buy them new from Ford Racing with the exhaust kit for around $2000. If you want the valence alone, your best bet is to find one used or scratch and dent off eBay.


Sent from my iPhone using Tapatalk

 

[Quiksilver15]

You can buy them new from Ford Racing with the exhaust kit for around $2000. If you want the valence alone, your best bet is to find one used or scratch and dent off eBay.


Sent from my iPhone using Tapatalk

thats what I thought, haven't seen a part number for the valance solo.

 

[byklin]

For those that were asking - just the angle of the picture. The tips are a little off center, but they're well insulated by the built in tip on the valence. Plastic is safe from the heat.

Sent from my iPhone using Tapatalk

Oh ok, thats good to know. So they still sit inside the build in tip, just off-centered.

Sponsored