American Muscle sale.

[15Black3.7]

Man I was going to return these Holgens but it's going to be $10 a wheel to get the shipping labels. Could be worse. Gonna put these up on the classifieds unless anyone knows where I can get some cheap tires to throw on them

Sponsored

 

[Shouldhavegotthegt]

Go on eBay. 275/35 Lexani tires for $429 shipped. I paid $700 for my Nittos.

 

[bigred90gt]

Front and rear are 20x10 45mm offset

Did you need spacers?

 

[ForTehNguyen]

I test fitted my 19x10 Axiom without a tire, it was pretty close to the strut maybe 3mm of clearance. A 5mm spacer would give it some breathing room.

 

[SoCalTim]

I test fitted my 19x10 Axiom without a tire, it was pretty close to the strut maybe 3mm of clearance. A 5mm spacer would give it some breathing room.

I like the color of your Axioms. Please post up a pic when you have them mounted!

 

[sandeale]

nope, no spacers were used

 

[Built4Speed]

Hey Guys - Let me double-check on the spacer question for both the 19 and 20" - The last thing I want is for you to be sitting with wheels that don't clear!

As per the TPM Sensors they'll work fine from Ford and any Lug Nut Right Here will do the trick.

Alex

Will my factory lug nuts work with MMD Holgen 20x10 wheels?
I have the 18" forged wheels like these:

 

[AMAlexLazarus]

@AMAlexLazarus do you know if the stock center caps will fit on the MMD wheels??

[MENTION=12224]stormtrooper[/MENTION] - Good question and while the diameter of the cap itself (2.5") is the same the retainer clips on the rear is where most if not all of the issues stem from. They may need to be modified to be compatible.

Will my factory lug nuts work with MMD Holgen 20x10 wheels?
I have the 18" forged wheels like these:

[MENTION=21907]Built4Speed[/MENTION] - Shouldn't be a problem sir.

I'm working through PM's right now guys, sorry about the delay.

Alex

 

[Built4Speed]

1) How much torque should I use for the MMD Holgen wheels? I believe the OEM wheels call for 150 ft/lbs.

2) Do I need hub centric wheel rings with these wheels?

 

[15Black3.7]

Got my Amr wheels today[emoji1305] got to say they look better than expected. Now somebody buy my Holgens that are in the classifieds lol


Sent from my iPhone using Tapatalk

 

[SoCalTim]

[MENTION=22150]15Black3.7[/MENTION]

They look awesome :cheers:

 

[Shouldhavegotthegt]

Anyone get their Holgens yet? Mine got delayed and should be here in a few days. The tires just got here and so did my new TPMS. Can't wait to get these on

 

[AMAlexLazarus]

1) How much torque should I use for the MMD Holgen wheels? I believe the OEM wheels call for 150 ft/lbs.

2) Do I need hub centric wheel rings with these wheels?

[MENTION=21907]Built4Speed[/MENTION]

1) We'll usually suggest going with OE TQ specs along with PSI's

2) You will not - Take them out of the box, jack the car, new wheels!

Let me know if you have any other questions at all.

Got my Amr wheels today[emoji1305] got to say they look better than expected. Now somebody buy my Holgens that are in the classifieds lol

[MENTION=22150]15Black3.7[/MENTION] - Looking good!

 

[bigred90gt]

Just a fair word of warning, I just left the tire shop, and the OEM Valve stems with the tpms hit the calipers on the front. And I don't have PP brakes. 19x10 +45mm offset with the 5mm spacers.

I'm having them install short valve stems without the sensors, and I'll figure something out.

 

[Built4Speed]

Just a fair word of warning, I just left the tire shop, and the OEM Valve stems with the tpms hit the calipers on the front. And I don't have PP brakes. 19x10 +45mm offset with the 5mm spacers.

I'm having them install short valve stems without the sensors, and I'll figure something out.

Which brand and model wheel is this?

Sponsored