Official MRR Design Flow Forge light weight FS01 info.

[mvp90805]

the only thing with the FS01 20x10.5 is that it can only go from a 12et all the way to a 39et max.

we basically cater this width for imports/ although im very sure a 20x10.5 will fit the stang but somewhat aggressively

hm should we test it out ;)

Sponsored

 

[MRRDesignWheels]

I would still love to see that. I am getting a bit bummed though as i wanted to keep my rotational mass down by going 19s.

no need to be bummed out the concave on the 19x11 rears is a great option.

 

[Waldorf]

In this case the last pic you see is the concavity level on the 19x10 FS01 wheel, the 19x11 is a bit more


what is the tire size on the last pic?...is it lowered?...cause I like that look...

Square setup with 19x10 +35 FS01's with 275/40 BFG Sport Comp2's. Stock PP ride height. If I drop it... it'll scrape going up my driveway. Life's a bitch and then ya die... or marry one.

Here's a straight on shot of the right front:

Very, very gloss black. You can see the clouds in the sky and the tree behind where I took the pic reflected in the wheel. Carlos and Company do GREAT powder coating. All 4 wheels are like that... inside and out. Perfect finish and perfect fit. And when they get dirty from brake dust and road film... they look "matte" black. Kind of a fringe benefit. ;)

That is all...

 

[MRRDesignWheels]

Square setup with 19x10 +35 FS01's with 275/40 BFG Sport Comp2's. Stock PP ride height. If I drop it... it'll scrape going up my driveway. Life's a bitch and then ya die... or marry one.

Here's a straight on shot of the right front:

Very, very gloss black. You can see the clouds in the sky and the tree behind where I took the pic reflected in the wheel. Carlos and Company do GREAT powder coating. All 4 wheels are like that... inside and out. Perfect finish and perfect fit. And when they get dirty from brake dust and road film... they look "matte" black. Kind of a fringe benefit. ;)

That is all...

Thank's !! and I am super glad for your support and definitely happy that your satisfied with our brand.
:cheers:

 

[Cascadia_302]

Square setup with 19x10 +35 FS01's with 275/40 BFG Sport Comp2's. Stock PP ride height. If I drop it... it'll scrape going up my driveway. Life's a bitch and then ya die... or marry one.

Yeah l hear ya, those speed bump driveways are a pain with a lowered car:frusty:;)

 

[ronnieb1958]

I want the GT350 steering wheel just for shits and giggles.



Well lets start from the top if we can. The GF9 has the three sizes 8.5/9.5/10 the main thing is the 8.5 is a flatter concave the 10" doesnt come in the proper range for the offset so that means we have to use the 9.5 which is fine because when we did the test fit on the GT PP we concluded with our special in house offsets you can rock it as a badass square setup with the max amount of concave.

As for the FS01 wheels their flow forge wheels same concept as a blank, bu the difference is that the wheel now comes in a wider range of widths and offsets thus when they developed the wheel they needed to consider a proper X factor for the design which would allow for a wider wheel to fit upfront on a big brake vehicle application. That is the reason why as the width gets larger the wheel doesnt necessarily get deeper and deeper in concave.

You know you can always ask me im here to help however I can.

Hmmm...so I can rock the GF9 19x9.5 on 275/40/19 wheels, square fit, no spacers, no rubbing with deep concave front and rear on my Ecoboost Premium with no Performance Pack???????????


say yes! lol

 

[ronnieb1958]

Mustang's have plenty of room here is what you can easily do front and back.
width wise.

Fronts: 8.5, 9, 9.5, and 10

Rears: 8.5, 9, 9.5, 10, 10.5, 11 and 12 wide

what about the GF9 in particular?...i'm looking for 19x9.5 275/40/19 square fit

 

[ElementWheels]

what about the GF9 in particular?...i'm looking for 19x9.5 275/40/19 square fit

Ronnie the GF9 will definitely fit your mustang and has a great angle of concave, we have shipped a few sets out and each client has been very satisfied, my team did some good test fits prior to the gf9 being released and the calculation is perfect with a 30 off set. If you have any questions feel free to pm.

 

[ronnieb1958]

Thanks for responding promptly...

Sent from my XT1585 using Tapatalk

 

[Need4SpeedMotors]

Hmmm...so I can rock the GF9 19x9.5 on 275/40/19 wheels, square fit, no spacers, no rubbing with deep concave front and rear on my Ecoboost Premium with no Performance Pack???????????


say yes! lol

Yes bro they work, remember the few convos weve had about the fitment, using the special offsets ive developed they fit and work great no rubbing man

 

[MostlyHarmless]

I'm looking at several different wheels right now, and the FS01 is definitely intriguing. Would I be able to get it in 19x10 front and back, properly offset for my car having been lowered with Steeda Ultralites? I'm interested in a price for the matte bronze finish.

 

[Need4SpeedMotors]

I'm looking at several different wheels right now, and the FS01 is definitely intriguing. Would I be able to get it in 19x10 front and back, properly offset for my car having been lowered with Steeda Ultralites? I'm interested in a price for the matte bronze finish.

yes sir we can cut them using our special specs to fit perfectly.

Pm sent.

 

[MustangNick]

Anyone pulled the trigger on a brushed set of these yet. I'm tired of seeing black wheels on yellow cars

 

[Need4SpeedMotors]

Anyone pulled the trigger on a brushed set of these yet. I'm tired of seeing black wheels on yellow cars

Brushed weve done a few sets of them on a few cars in general they came out clean.

 

[MRRDesignWheels]

I'm looking at several different wheels right now, and the FS01 is definitely intriguing. Would I be able to get it in 19x10 front and back, properly offset for my car having been lowered with Steeda Ultralites? I'm interested in a price for the matte bronze finish.

MiddleAgedPunk you wont have a problem with the FS01 wheels and your Steeda Ultralights , we developed the FS01 in many custom specs and we also work very closely with Steeda directly as they are a MRR Authorized vendor. We can assure you that the FS01 will be a perfect flawless fit and will be a perfect paired mod as the FS01 is very light weight so the both will compliment each other.

Sponsored