Dual 3" Mid muffler for Catless

[Quiksilver15]

So I've been thinking lately about how to quiet down my car after I go catless. I currently have a MBRP Street cat-back, and I've heard it catless. That is just way too loud for me, I found this Dual 3" in/out muffler that looks like it could replace the H pipe. Muffler is stainless, and has a internal X. Should calm the car down a little in combination with the MBRP mufflers.

Thoughts? Other suggestions?

http://www.summitracing.com/parts/jex-mf2469/overview/

Sponsored

 

[Evilwill]

I would add one of these to each side right behind the h-pipe. Hope this Helps or it gives you an idea or push in the right direction

http://www.summitracing.com/parts/kok-r300-14/overview/

or

http://www.summitracing.com/parts/kok-r300-10/overview/

or you can add 2 of flowmasters hushpower II mufflers. Which you can find here

http://www.summitracing.com/search/brand/flowmaster/part-type/mufflers/product-line/flowmaster-hushpower-ii-mufflers?N=400238%2B4294948821&SortBy=Default&SortOrder=Ascending&autoview=SKU&ar=1

 

[pinero61]

I went with race cats, but also added a pair of 3" Vibrant resonators. Sound is amazing, and the volume falls slightly louder than a cat-back unless I'm WOT. Then, she screams like a banshee.

They completely killed rasp/tinny sound levels, most of the drone from the mag comp AB, and with all 3" connections, it flows very well.

 

[Quiksilver15]

That was another thought I had, was to run the longest resonators i could find, 18" probably

 

[pinero61]

Mine are 13" total lenghth. Longer ones would be even better, but these do the job well.

 

[pinero61]

 

[GuardGT]

these should do just fine, ive used them a few times in addition to turbo mufflers to meet strict sound requirements at laguna seca, and they are dirt cheap
http://www.summitracing.com/parts/wlk-24222/overview/

and this is another inexpensive option. I may throw this on my 16 for shits and giggles
http://www.summitracing.com/parts/mpe-12469/overview/

 

[BluByeU]

I have the race and the drone can be nerve-racking at times...will soon order the SP LTHs from Beefcake. I'm going to have the Dynomax Race Bullets installed after the headers have been installed.

 

[pinero61]

I have the race and the drone can be nerve-racking at times...will soon order the SP LTHs from Beefcake. I'm going to have the Dynomax Race Bullets installed after the headers have been installed.

Headers actually helps with the drone. I have tha magnaflows.

 

[BluByeU]

Headers actually helps with the drone. I have tha magnaflows.

That's what I hear, the plan is to see what it (drone) is like after installing the LTH. May or may not go with the Dynomax depending on the sound/drone.
Thanks for the input..

 

[Quiksilver15]

these should do just fine, ive used them a few times in addition to turbo mufflers to meet strict sound requirements at laguna seca, and they are dirt cheap
http://www.summitracing.com/parts/wlk-24222/overview/

and this is another inexpensive option. I may throw this on my 16 for shits and giggles
http://www.summitracing.com/parts/mpe-12469/overview/

Only issue with that magnaflow muffler is it has an internal Y, not X. So I feel it will restrict my exhaust.

Im even considering swapping out my rear mufflers for 3" turbo mufflers.

The issue I have with race cats is that I plan to run a lope tube, and cams in the future. Can't run cats with those.

 

[pinero61]

Only issue with that magnaflow muffler is it has an internal Y, not X. So I feel it will restrict my exhaust.

Im even considering swapping out my rear mufflers for 3" turbo mufflers.

The issue I have with race cats is that I plan to run a lope tube, and cams in the future. Can't run cats with those.

Race cats will handle it, but unless you have a raspy exhaust it's not very dramatic.

 

[GuardGT]

Only issue with that magnaflow muffler is it has an internal Y, not X. So I feel it will restrict my exhaust.

take a look at the mf website on the part number. its a full internal x pipe.

 

[Quiksilver15]

take a look at the mf website on the part number. its a full internal x pipe.

https://www.magnaflow.com/products?partNumber=12469
It says internal Y pipe. The internal X version is the bigger muffler, 5*11 I think

 

[GuardGT]

https://www.magnaflow.com/products?partNumber=12469
It says internal Y pipe. The internal X version is the bigger muffler, 5*11 I think

I linked the wrong tab on my phone, and was referencing back to the 12599, sorry. the 12599 is an overall length of 28 in, 22in body length, 4 inches longer overall and has an actual x.

Sponsored