pro charger h.o spark plugs

[jared89]

DO you guys run stock plugs? If not what plugs should i get? Just got the install wrapped up, waiting on my tune.

Sponsored

 

[sanchezcruz_20]

I went with these:
http://www.amazon.com/NGK-LTR7IX-11-Iridium-Spark-Plug/dp/B001RLTZ7A

 

[beefcake]

we like the brisks, the ngk6510s are good too

 

[jared89]

we like the brisks, the ngk6510s are good too

Stupid question, i am new to forced induction. What are brisks

 

[beefcake]

its a spark plug brand

 

[z06psi]

Just had a Brisk fail on me. I will post a pic later.

Sent from my SM-N910V using Tapatalk

 

[Reds197]

I went with these:
http://www.amazon.com/NGK-LTR7IX-11-Iridium-Spark-Plug/dp/B001RLTZ7A

I have had good luck with these.

 

[jared89]

I went with the 6510s seems everyone likes them:cheers: thanks everyone

 

[z06psi]

So the ceramic around the central electrode now slides up and down. It wasn't the tune as the ground strap looks just fine on color and shape.

 

[Barrel]

My NGK 6510s have been perfect.

 

[Travis@boostworks]

Ngk 6510.. Gap at .032".

 

[ProChargerTECH]

So the ceramic around the central electrode now slides up and down. It wasn't the tune as the ground strap looks just fine on color and shape.

Detonation can do that.

Rattles the motor hard, it shakes the guts of the plug loose.

AFR issues melts things,
Timing issues beat the heck out of stuff.

I haven't seen a plug do that, since I saw tuners turning off knock sensors.

 

[Travis@boostworks]

Lund doesn't turn off the knock sensors.. Just clearing the air on that.

 

[AdrianMAK]

NGK 6510s.
Havent failed us yet.

 

[z06psi]

No knock retard all the way to 7475 rpm. The only knock I have are the DSS halfshafts in the back.

Sponsored