Procharger red race valve

[whatsup62]

Can anyone show pics of where they mounted theirs and what it took to get it in place?
Thanks

Sponsored

 

[SolarFlare]

Turbosmart 50mm is a better fit. Just saying.

 

[whatsup62]

Turbosmart 50mm is a better fit. Just saying.

Damn...should have asked before I purchased.

 

[SolarFlare]

Damn...should have asked before I purchased.

And it might be cheaper. I have mine pointed up and doesn’t touch the radiator cover. Might not work on the RR valve

 

[ahl395]

Doesn't prochager make a pipe that incorporates the red race valve? I believe it mounts right in front of the blower inlet elbow.

I am very happy with my Turbosmart 50mm also though, mounted on the hot pipe right behind the grille. Looks awesome.

 

[whatsup62]

Doesn't prochager make a pipe that incorporates the red race valve? I believe it mounts right in front of the blower inlet elbow.

I dont think so..cant find anything. The valve comes with a weld on piece to make your own port.

I am very happy with my Turbosmart 50mm also though, mounted on the hot pipe right behind the grille. Looks awesome.

Thats where Im thinking about going with it...might need to modify grill a bit.

 

[ahl395]

I dont think so..cant find anything. The valve comes with a weld on piece to make your own port.


Thats where Im thinking about going with it...might need to modify grill a bit.

Check page #26 of the Procharger installation manual.

Tube #381 is what you need. Check the attached picture it shows where the mounting placement is also. You have to be careful with the placement if you're using the stock rubber 90* elbow as you don't want the race valve to press up against it. If you're using a MAK inlet you'll have to make a dent/dimple in it to fit the valve.

I prefer the BOV on the hot pipe behind the grille for sure. If you have a grille on the side openings you will have to trim it to fit (I did). If you have no actual grille mesh in the side openings the BOV will probably fit right though with no problem. If you get the coupler welded onto the pipe make sure to either get a new aluminum pipe made up or to paint the steel Procharger pipe otherwise it will rust once sanded down and welded on.

 

[Jay-rod427]

I know you're chasing some sort of issue, but the proflow is not the problem. Wasted $$$ and headache imo.

 

[SolarFlare]

^ I disagree, but he should try the belt first.

 

[r1lovin]

The red race valve has been moved to the same location as the pro flow. Comes with new ic pipe and red race valve.

 

[ahl395]

The red race valve has been moved to the same location as the pro flow. Comes with new ic pipe and red race valve.

Oh damn, I didn't know that. That placement is so much better. Thanks :cheers:

 

[whatsup62]

I know you're chasing some sort of issue, but the proflow is not the problem. Wasted $$$ and headache imo.

Im lucky, have $$$ to waste...headache you are probably right.

^ I disagree, but he should try the belt first.

Doing that as well , always wanted the louder sound so do both at the same time . I know its a easy job but I HATE taking off the fascia,

The red race valve has been moved to the same location as the pro flow. Comes with new ic pipe and red race valve.

Correct #444 on its way.

 

[80FoxCoupe]

So tube 444 puts the red valve in front of the radiator support? How much for that part Doug?

 

[whatsup62]

So tube 444 puts the red valve in front of the radiator support? How much for that part Doug?

$110

 

[yote41]

Tial q fits right behind grill nicely

Sponsored