Epiphany
Well-Known Member
- Thread starter
- #1
My good friend Mike from Buyfordracing has been keeping me abreast of some upcoming offerings that I'd like to share. First, a soon to be released cooling kit for the rear differential.
This is what will be in the diff cooler kit
Vent
Silicone
Retaining clips
Harness
Nut rr hub
cooler pumps
Diff cooler
2-3 line assy
misc hardware
brace
switch panel
Switch panel means it isn't necessarily integrated with the factory control modules. Looking forward to what they came up with in terms of wiring.
He also wrote "ETA 2-3 days Ford Performance clock" and I think he's trying to say that it should be available shortly but is well aware of lagging dates as of late.
Regarding brakes, I asked him to order me one of the M-2300-Y kits a while back.
https://performanceparts.ford.com/part/M-2300-Y
Looks like it won't ship until mid August. My plan was to sell the calipers (Firestarter has asked for them) and I plan on using the remainder for some development work. Today Mike sent me an email about another brake kit FRP is releasing, M-2300-AA.
https://performanceparts.ford.com/part/M-2300-AA
Not sure how well the AA kit will sell given that you can pick up factory R calipers from Ford Parts for under 1K and most don't need new rotors. Regardless, it looks as though FRP has taken note of the R caliper sales through the service network and wants a piece of the pie.
And remember, nobody pays the retail prices shown by FRP. Warehouse distributor pricing is quite a bit less than that. Mike is usually the first to get any of this stuff as his warehouse is very close to FRP. If you have any questions about the differential cooling kit he is definitely the one to talk to.
This is what will be in the diff cooler kit
Vent
Silicone
Retaining clips
Harness
Nut rr hub
cooler pumps
Diff cooler
2-3 line assy
misc hardware
brace
switch panel
Switch panel means it isn't necessarily integrated with the factory control modules. Looking forward to what they came up with in terms of wiring.
He also wrote "ETA 2-3 days Ford Performance clock" and I think he's trying to say that it should be available shortly but is well aware of lagging dates as of late.
Regarding brakes, I asked him to order me one of the M-2300-Y kits a while back.
https://performanceparts.ford.com/part/M-2300-Y
Looks like it won't ship until mid August. My plan was to sell the calipers (Firestarter has asked for them) and I plan on using the remainder for some development work. Today Mike sent me an email about another brake kit FRP is releasing, M-2300-AA.
https://performanceparts.ford.com/part/M-2300-AA
Not sure how well the AA kit will sell given that you can pick up factory R calipers from Ford Parts for under 1K and most don't need new rotors. Regardless, it looks as though FRP has taken note of the R caliper sales through the service network and wants a piece of the pie.
And remember, nobody pays the retail prices shown by FRP. Warehouse distributor pricing is quite a bit less than that. Mike is usually the first to get any of this stuff as his warehouse is very close to FRP. If you have any questions about the differential cooling kit he is definitely the one to talk to.
Sponsored