Bad weather it cleared up so he took another set of shots for us to drool over.Why do the pics look like someone pissed on the lens :( Ah , thanks cbear for posting CLEAR pics!
yes, I had push in the grease cap slightly in on only one side to get the center cap to lock in place. I tested both front wheels to see if the problem was with the wheel or the hub and concluded the problem was the hub it stuck out more on the passenger side than the driver side. It was a very small amount to be pushed in. I feel it was worth it because I wanted to run a 10 inch wide wheel in the front with some concavity.
I agree...that's the wheel and tire combo i want!cbear50,
Thank you for posting those beautiful pics. That is one of the nicest mustangs I have seen on this forum. Great job with those wheels, it looks like a perfect fit!
lets do it brothaI agree...that's the wheel and tire combo i want!
The fitment required for the grease cap to be pushed in a tad so the front cap sits right.
and of course I can !
Its doable but a spacer will be required then.what size wheel or tire would i need to avoid having the grease cap be "pushed in a tad"...i've gotta have a no mod or adjustment fit...staying with the 275 or 285/35/20 square fitment.
Yes sir the offsets varied front and rear so it could clear the front Gt calipers.Are these diff offsets front to rear? Or would they be rotatable given same size tires?
I was eyeballing these for my winter wheels, but they would have to be square and rotatable.Its doable but a spacer will be required then.
Yes sir the offsets varied front and rear so it could clear the front Gt calipers.
they are rounder then the PP calipers so they require a lower offset to clear that properly.
For a winter setup i recommend slimmer wheels and tires to slice through the snow, we can do a 20x8.5 all around with proper winter tires for you if you desire.I was eyeballing these for my winter wheels, but they would have to be square and rotatable.
Its doable but a spacer will be required then.
Yes sir the offsets varied front and rear so it could clear the front Gt calipers.
they are rounder then the PP calipers so they require a lower offset to clear that properly.