Sponsored

Whipple Gen 5 Boost Gauge

Socal Stangman

Well-Known Member
Joined
Jun 30, 2020
Threads
23
Messages
134
Reaction score
53
Location
California
First Name
David
Vehicle(s)
2016 Mustang GT
Can someone give me some advice on where to tap into the Whipple to add a boost gauge? I have a Stage 2 on my 2015 Mustang GT.

Thanks
Sponsored

 

J17GT

Well-Known Member
Joined
Apr 21, 2019
Threads
9
Messages
838
Reaction score
739
Location
IL
Vehicle(s)
2017 Mustang GT PP
There are two 1/8" npt ports you could use. One on the back passenger side of the blower just below the IAT2 sensor. The other port on the passenger front of the blower just above the hose that goes to the bypass actuator.

The port on the front is pretty accessible. It's what most guys use as a boost reference to a fuel pressure regulator if running a fuel system. The port on the rear would be a bit of a pain to get eyes on with the blower in the car.
 
OP
OP
Socal Stangman

Socal Stangman

Well-Known Member
Joined
Jun 30, 2020
Threads
23
Messages
134
Reaction score
53
Location
California
First Name
David
Vehicle(s)
2016 Mustang GT
There are two 1/8" npt ports you could use. One on the back passenger side of the blower just below the IAT2 sensor. The other port on the passenger front of the blower just above the hose that goes to the bypass actuator.

The port on the front is pretty accessible. It's what most guys use as a boost reference to a fuel pressure regulator if running a fuel system. The port on the rear would be a bit of a pain to get eyes on with the blower in the car.
Awesome, thank you. I’ll try to access the one in the front. I’m guessing the one in the rear is a pain in the rear…thanks for the help.
Sponsored

 
 








Top