loosemoose
New Member
- Joined
- Oct 26, 2021
- Threads
- 2
- Messages
- 4
- Reaction score
- 0
- Location
- Australia - Queensland
- First Name
- Adam
- Vehicle(s)
- 2017 Mustang GT Whipple 3.0 Supercharger
- Thread starter
- #1
Hi all,
new here so hope this is in the right format to pose a question.
I have just used forscan to enable the boost gauge which is working fine.
I changed 720-06-01 line changing the **6* **** **** to **7* **** ****
the original line read FC6F 067B 98C2
My question is the boost gauge is displaying in BAR and Not PSI is it possible to switch it to PSI?
This is an Australian Right Hand Drive vehicle.
If any one could assist that would be great and thank you in advance.
new here so hope this is in the right format to pose a question.
I have just used forscan to enable the boost gauge which is working fine.
I changed 720-06-01 line changing the **6* **** **** to **7* **** ****
the original line read FC6F 067B 98C2
My question is the boost gauge is displaying in BAR and Not PSI is it possible to switch it to PSI?
This is an Australian Right Hand Drive vehicle.
If any one could assist that would be great and thank you in advance.
Sponsored