Wheel Spacers

[STEVO 5.0]

I used the Coyote 1" spacers on all 4 PP wheels.

https://www.americanmuscle.com/1in-...gh&gclid=CIijw9zuw9oCFWmYxQIdz6AKFw&gclsrc=ds


Went with 150 LBS on the spacers and the wheels. Also used blue Loctite on the SPACERS ONLY.

Only have about 400 miles on them. No issues and it looks fantastic compared to stock. I really like the look of the PP wheels and couldn't see changing them out for the cost.

Sponsored

 

[2morrow]

I'm looking for a pair of slip on spacers to run a 11" square set up for track duty.

Any suggestions for brands to use or stay away from?

TIA

 

[Champracerj]

^^^^ This

 

[2morrow]

^^^^ This

This is the exact set up I'm going for.

What brand or where did you get them? I'm assuming you went with the ARP 3" studs as well?

Thanks,
Todd

 

[Champracerj]

This is the exact set up I'm going for.

What brand or where did you get them? I'm assuming you went with the ARP 3" studs as well?

Thanks,
Todd

Square 19x11 50 mm offset SVE SP2 Replicas.
I went with the long studs and spacers.
ARP 100-7733 1" longer than OE
CJ 1" spacers
Tires 305/30/19 RE71
Installed studs into stock hub with Lang 754R - 14mm x 1.50 Threaded Wheel Stud Installer tool

 

[2morrow]

Square 19x11 50 mm offset SVE SP2 Replicas.
I went with the long studs and spacers.
ARP 100-7733 1" longer than OE
CJ 1" spacers
Tires 305/30/19 RE71
Installed studs into stock hub with Lang 754R - 14mm x 1.50 Threaded Wheel Stud Installer tool

This is great info, thank you!!!

 

[musclesoh92467]

Spacers

The spec to use safely is 6 mm but I have 8mm or 5/16" on my Coyote Red. 28,000 miles.

I have the AM wheels 19x 11 should I be OK using 5/16 spacers and how many turns did you get ? Eric

Sponsored