What to add factory subwoofer to trunk.

[Robertp]

I’m not sure on that as I know the 19s have b&o so I’m not 100 percent on that

Sponsored

 

[MichaelD]

The B&O system, and the HD radio system are two separate packages. Couldn't ktp1598 just add the HD radio module (correct term is escaping me right now), just needs the right part number.

 

[ktp1598]

I'd like to be able to go on eBay and put in a part # or description and find what I need. Did that for the shaker amp for the subwoofer install and pics made it easy. I'm not even sure what the HD radio module looks like.

 

[MichaelD]

I'd like to be able to go on eBay and put in a part # or description and find what I need. Did that for the shaker amp for the subwoofer install and pics made it easy. I'm not even sure what the HD radio module looks like.

Could try finding the part number on Parts.ford.com

 

[opengl]

I'd like to be able to go on eBay and put in a part # or description and find what I need. Did that for the shaker amp for the subwoofer install and pics made it easy. I'm not even sure what the HD radio module looks like.

Here's a post explaining it: #3

But basically you need to look for an ACM that has HD Radio listed on the label. They should all be the same.

Like this one: https://www.ebay.com/itm/2015-2016-...AOSwRaFcYh5I:sc:FedExHomeDelivery!19040!US!-1

I guess the only question mark would be your B&O system, not sure if we have any confirmed reports of it being the same.

 

[ktp1598]

I don't have the B&O (wish I did) system so maybe plug and play?

 

[opengl]

Ah got my wires crossed there. Yeah you should be good to go.

 

[wsfrazier]

I take it there is no fully plug-n-play setup for the 19 cars with the blue connector to use the B&O DSP and sub?

Rather not need to run my own wire from a DSP to the back.

 

[ktp1598]

I'd like to know as well, though I don't think I've even seen a Mustang with B&O. I do know that at one website I went to this morning it said the wiring harness from the blue plug to the amp was discontinued. I'd say it was a typo or something but to be safe I'm ordering one now.

 

[Dustin5.0gt]

So what all dsp will work? I cant find a cp model

 

[Chef jpd]

Just a heads up.
I'm upgrading to a JL stealthbox next week.
I will be advertising my factory sub enclosure with an RF replacement speaker and polyfill.
No amp, you will need to add your own. Factory amp is junk anyway.
Will include all brackets and bolts.
Stay tuned in the for sale section

20170124_121128 by chefjpd, on Flickr

 

[paul_g]

So I read about the first 3 or 4 pages of this thread up to the point where Robert got his sub working. So I went out to the garage and pulled away the trunk liner and grabbed these pics.

I have a 2019 GT/CS (which is a GT Premium) 400A, 9 Speaker Sync 3. It appears that I do NOT have the blue connector so I'm guessing I'm SOL???

 

[ktp1598]

I also have a 2019 GT/CS but I also have 401A and I have the blue plug. Don't have active exhaust or MR. I do have the safe and smart package. I wonder if it's bundled with 401A?

 

[wsfrazier]

When trying to look up the part # for the B&O subwoofer that comes on 19 cars, it shows the same part number as the old shaker subwoofer from 15-17 cars. However the sub is clearly different.

Anyone with better access to Ford part system able to help get part numbers for what us '19 guys would need to make the B&O sub work? I assume DSP, hardness, and Sub from a B&O equipped car? I wouldn't mind being the test dummy for 19 cars.

 

[Chef jpd]

https://www.mustang6g.com/forums/threads/fs-shaker-pro-subwoofer.123707/

Sponsored