Sponsored

Twin Turbo Build!

TonyJ5150

Well-Known Member
Joined
Apr 2, 2016
Threads
40
Messages
261
Reaction score
237
Location
Indianapolis, IN
Vehicle(s)
2016 Shelby GT350
I've been getting a lot of messages from members who are interested in the progress of my twin turbo build so I figured I would share with all.

Ill try to help answer any questions I can, and I'm sure my builder, Fathouse Fabrication will chime in to help.

And please be respectful and don't forget the golden rule, If you have nothing nice to say, say nothing!

Details
Twin Precision Turbos Gen 2 6266 Turbos! The turbos in the photos are for mock up use and not the ones that will make its home under my hood.
GT350 emblem and turbo.jpg
GT350 Engine Coming Out.jpg
GT350 Engine Out.jpg
GT350 Pass Header.jpg
GT350 Dr Side Header.jpg
GT350 Pass Header Start.jpg
GT350 Dr Header Almost Done.jpg
GT350 Engine From Back with Headers.jpg
Sponsored

 

tsloms

Well-Known Member
Joined
Jan 3, 2016
Threads
8
Messages
406
Reaction score
110
Location
Wisconsin
Vehicle(s)
2016 Mustang GT Magnetic PP
I have a GT350 that I'm looking to build for my GT. I was told by some engine builders to not use the flat plane crank in a high hp application due to the harmonics created by the crank.
Will you be sticking with the flat plane crank? Do you have a built engine? What are your hp goal?
I'll be following this build closely as I'll be adding a Whipple to my GT350 engine and am not sure which direction to go with the engine build.
 

raiderjatt02

Well-Known Member
Joined
Aug 13, 2015
Threads
6
Messages
990
Reaction score
1,049
Location
Bay Area, CA
First Name
Jessie
Vehicle(s)
2016 GT350 - Track Pack; 1995 GT - Saleen Clone
What an awesome build. I don't want FI on my own car but I love seeing these builds! Can't wait to see the final product. Good luck!
 
OP
OP
TonyJ5150

TonyJ5150

Well-Known Member
Joined
Apr 2, 2016
Threads
40
Messages
261
Reaction score
237
Location
Indianapolis, IN
Vehicle(s)
2016 Shelby GT350
I have a GT350 that I'm looking to build for my GT. I was told by some engine builders to not use the flat plane crank in a high hp application due to the harmonics created by the crank.
Will you be sticking with the flat plane crank? Do you have a built engine? What are your hp goal?
I'll be following this build closely as I'll be adding a Whipple to my GT350 engine and am not sure which direction to go with the engine build.
Yes, keeping the crank...hoping to run about 800hp with low boost on E85....engine is stock except for crank and oil pump gears.
 

tsloms

Well-Known Member
Joined
Jan 3, 2016
Threads
8
Messages
406
Reaction score
110
Location
Wisconsin
Vehicle(s)
2016 Mustang GT Magnetic PP
Ok cool. I'm sure you won't have any issues unless you decide to turn the wick up on those turbos!! Lol

I'm looking to hit 900-1000whp out of mine when I drop it in.
 

Sponsored

OP
OP
TonyJ5150

TonyJ5150

Well-Known Member
Joined
Apr 2, 2016
Threads
40
Messages
261
Reaction score
237
Location
Indianapolis, IN
Vehicle(s)
2016 Shelby GT350
Ok cool. I'm sure you won't have any issues unless you decide to turn the wick up on those turbos!! Lol

I'm looking to hit 900-1000whp out of mine when I drop it in.
I thought about going for a big number pull on the dyno...but I'm still undecided....I would hate to unexpectedly find this engines limit...just to post a number...
 

MadCow

Well-Known Member
Joined
Sep 9, 2013
Threads
5
Messages
475
Reaction score
156
Location
Bama
Vehicle(s)
Civic
Excited to see this build. Please oh please tell me you plan to take this car to a track.

I'm all for seeing how much power the stock Voodoo can take, but since you have the motor out, would it be too much trouble and expense to do a set of rods and pistons? Hellion put some in a car that were the exact same weight as the stock ones so no balance issues. Also how high do you plan to turn this thing.
 
OP
OP
TonyJ5150

TonyJ5150

Well-Known Member
Joined
Apr 2, 2016
Threads
40
Messages
261
Reaction score
237
Location
Indianapolis, IN
Vehicle(s)
2016 Shelby GT350
Excited to see this build. Please oh please tell me you plan to take this car to a track.

I'm all for seeing how much power the stock Voodoo can take, but since you have the motor out, would it be too much trouble and expense to do a set of rods and pistons? Hellion put some in a car that were the exact same weight as the stock ones so no balance issues. Also how high do you plan to turn this thing.
I got a quote on how much to build the engine...its not cheap...I'm talking about 10-15K if I remember..Im not going to push this till it blows...so we should be able to make 800hp without carnage...

Hell ya I'm going to track it! The lower turbos will help with weight issues as opposed to having them up high infront of the engine, and I plan to put on a set of super light weight Forgelines to help offset some of the weight of the turbos...
 

SoCalTim

Member
Joined
Sep 14, 2015
Threads
185
Messages
3,137
Reaction score
1,610
Location
CA
First Name
Tim
Vehicle(s)
Sold : 15 GT
Awesome build! Looking forward to more photos!!
 

firestarter2

Well-Known Member
Joined
Jun 16, 2016
Threads
69
Messages
3,209
Reaction score
1,163
Location
NYC
Vehicle(s)
RR G350 Track
Looks good! you should have no boost creap issues
 
Last edited:

Sponsored
OP
OP
TonyJ5150

TonyJ5150

Well-Known Member
Joined
Apr 2, 2016
Threads
40
Messages
261
Reaction score
237
Location
Indianapolis, IN
Vehicle(s)
2016 Shelby GT350
OP
OP
TonyJ5150

TonyJ5150

Well-Known Member
Joined
Apr 2, 2016
Threads
40
Messages
261
Reaction score
237
Location
Indianapolis, IN
Vehicle(s)
2016 Shelby GT350
 




Top