Sponsored

Trouble with new amp and remote start

Zydrigeon

Member
Joined
Mar 8, 2016
Threads
3
Messages
8
Reaction score
0
Location
Oklahoma
Vehicle(s)
2020 Mustang Ecoboost Premium
So being that i know nothing of car stereos, i took my 2020 eco premium with the 9spkr system (no sub) to a local stereo shop. They installed an amp and sub. Told me the amp turns on and off on opening the door and starting the car. This works fine. However when i went and remote started my car (as i will do in the mornings/after work to warm it up) the amp did not and would not turn on. Am i going to have to R.S to warm it up, go out, shut it off, wait 30 seconds, then get in and restart it every single time? I'll be calling the shop tomorrow when they are open, but just wanted to ask/vent i guess.
Sponsored

 

FreePenguin

Well-Known Member
Joined
Sep 29, 2019
Threads
81
Messages
5,354
Reaction score
3,704
Location
Ohio
First Name
Donald
Vehicle(s)
17 mustang
Vehicle Showcase
1
have them use fuse 23, micro tap as remote turn on wire, if they are needing one. that's what I used.
 

20ducks

Well-Known Member
Joined
Jun 7, 2020
Threads
174
Messages
777
Reaction score
392
Location
Originally South Side Chicago
First Name
Greg G.
Vehicle(s)
2020 Mustang GT Premium Convertible Rapid Red
Vehicle Showcase
1
Is the remote turn on the traditional blue wire to the amp turn on or is it one of those low voltage detectors? This is a total shot in the dark.
 
OP
OP

Zydrigeon

Member
Joined
Mar 8, 2016
Threads
3
Messages
8
Reaction score
0
Location
Oklahoma
Vehicle(s)
2020 Mustang Ecoboost Premium
Is the remote turn on the traditional blue wire to the amp turn on or is it one of those low voltage detectors? This is a total shot in the dark.
its a Kicker KISLoc2 using a signal detector.
Sponsored

 
 








Top