Tips/Advice fitting GT350 Track Pack Spoiler

[Manders Mustang]

I'm sure other words/phrases can be made from the letters...

"RAG IT"

"TIT race"

"Magician"

Sponsored

 

[Centurion07]

https://new.wordsmith.org/anagram/anagram.cgi?anagram=Martiniracing&t=500&a=n

Some good ones there...

 

[Manders Mustang]

https://new.wordsmith.org/anagram/anagram.cgi?anagram=Martiniracing&t=500&a=n

Some good ones there...

Micra Training... Has to be that!!!!

 

[SteveS]

Nah, went through that entire list but can't get past tit race. Make it happen Manders... ;)

EDIT: Jaysus, only one T and no Es. Don't ever go on Countdown...

 

[Manders Mustang]

Nah, went through that entire list but can't get past tit race. Make it happen Manders... ;)

EDIT: Jaysus, only one T and no Es. Don't ever go on Countdown...

i was making stickers into other letters, tactical and thinking outside the box ;)!
TI(I modded to a T) RAC(I+N made to an E)

 

[SteveS]

Too much work. Micra Training it is ;)

 

[Nookie]

True "racing" isn't quite on the side of old man magnetic

How did I know Mr Dog Dick Red was gonna pipe up on that one!

 

[RobMJ]

Just wanted to say a big thank you to [MENTION=14447]Centurion07[/MENTION] and [MENTION=23824]Nookie[/MENTION]

Fitted the GT350 2 weekends ago and all went well! I taped on template then measured 4mm up from drill points and make my indents for drilling there. I only had to increase the size of one hole on the right then spoiler went on first time. Really happy with the result best view is low down from the rear. Metal is super thin on boot. Then last weekend went on the Simply Mustangs meet/crusie round the Cotswolds which was excellent! Thanks again guys

 

[Centurion07]

Come on now, show us the pic from underneath the spoiler. Let's see how close you managed to get it!

 

[RobMJ]

Come on now, show us the pic from underneath the spoiler. Let's see how close you managed to get it!

Yes will get a pic for you but trust me you will be impressed. If I had followed the template it would defo have "overhang". Cheers :hail:

 

[Nookie]

Excellent job!

Amazing how badly out the template (still) is!

Looking forward to seeing the underneath pic... got mine mm perfect both sides and about 1mm out in the centre, which is due to a slight difference in the curvature of either the trunk lid or the spoiler, so nothing I could do about it... but got to be really anal to spot it.

The GT350 spoiler really suits the car and is without doubt one of the best (I'm slightly biased there of course)... and on Magnetic... what can I say !

Great thing is, apart from the dodgy template, that it can be used straight 'out of the box' as being Absolute Black it ties in perfectly with the tailgate panel.

Keep on modding...

 

[Stuart0202]

Should probably say thanks as I advised the fitter about the template being slightly off and now my fitment is perfect!
Couldn't be happier with the result.

Thanks guys!

Sponsored