Throttle Body spacer fitment issue

Discussion in 'I4 2.3L EcoBoost Engine / Mods: Bolt-ons, Exhaust,' started by lawrencecar, Oct 11, 2018.

  1. lawrencecar

    lawrencecar Well-Known Member

    Vehicle(s):
    2017 Mustang Ecoboost PP
    Joined:
    May 20, 2018
    Location:
    Virginia
    Posts:
    74
    Likes Received:
    17
    0   0   0
    Attempted to install a TB spacer and i have the mishimoto charge pipes on. With the spacer on there is not enough "flex" with the short coupler and the rigid tubing to get it to line up on the TB. Anyone install a TB spacer while having the after market cold side charge pipe on? Thanks
     
  2. Hellman109

    Hellman109 Well-Known Member

    Vehicle(s):
    2017 Mustang Ecoboost Convertible (See my garage)
    Joined:
    Jul 3, 2017
    Location:
    Melbourne, Australia
    Posts:
    233
    Likes Received:
    89
    Garage Profiles:
    1
    0   0   0
    Try putting the coupling on the throttlebody first, then attaching the charge pipe to that, I know with some setups thats what is needed.
     
  3. Juben

    Juben Well-Known Member

    First Name:
    Justin
    Vehicle(s):
    2015 EcoBoost Mustang (AT) w/PP
    Joined:
    Jan 29, 2015
    Location:
    Chattanooga, TN
    Posts:
    2,487
    Likes Received:
    776
    0   0   0
    Are you using the TBS for meth injection? If not, I wouldn't bother. Those spacers are snake oil and really don't provide any benefit further than an injection point.
     
Loading...

Share This Page