The ULTIMATE MyColor Complete Swap Thread

[natepcbfl]

I have the 50th AP on my premium 15, so it has the aluminum sill plates that I want to swap out. Are all the illuminated sill plates all the same or is there my color and non my color sill plates?

From what I have been able to find, I need the wiring pigtail as well since if you got the 50th AP they didnt even run the wires under the sill plates.

Anybody have the part numbers for the pigtail and the MyColor usable sill plates?

Sponsored

 

[Coconut]

I have the 50th AP on my premium 15, so it has the aluminum sill plates that I want to swap out. Are all the illuminated sill plates all the same or is there my color and non my color sill plates?

From what I have been able to find, I need the wiring pigtail as well since if you got the 50th AP they didnt even run the wires under the sill plates.

Anybody have the part numbers for the pigtail and the MyColor usable sill plates?

This thread has the answers: http://www.mustang6g.com/forums/showthread.php?t=20596

 

[Chrisv_s550]

whos the genius??!?! whos willing to walk me thru this and make some bucks thru paypal for the time ?

 

[natepcbfl]

Well I got my 4 wire sill plates, now need to get them put in and figure out how to get them working with MyColor. I am hoping the pigtail is already in place and it just works when I plug it up. Dont know yet if the AsBuitData needs to be changed or not or if I could just wire it into the existing MyColor floor lights.

 

[essque]

Thank you for this advice. After doing the swap properly are there any caveats, electrical gremlins or anything bizarre that has happened after the install? I just want the upgraded cluster to work like stock. I already have an aftermarket footwell kit that works great so I'm not concerned with anything else.

In order to swap, you need to use a MyColor Premium cluster. Plug it in. Then use ForScan to turn on/off functions in the cluster that your car has or doesn't. In my case, my cluster has Blis and a few other parts that my car does not. If I turn those off, my cluster will function normally without any errors.

 

[lemers]

So are the track apps and guage selection internal to the guage cluster?

Would a GT350 retain the digital speed guage and transmission temp guage if swapped for a mycolor guage cluster?

 

[Chrisv_s550]

bump. anyone with this know what we need to turn off from base to premium cluster? ford said thy wouldn't touch mine because its a unit with 0 miles on it. will send to odo pro. what do we need to reprogram the keyes?

Sponsored