T56 swap questions

[cole9725]

I am in the process of swapping over to a T56 magnum in my 2018. I previously purchased a Lpxhd clutch for the 18 mt82. I sent off the discs to be resplined to 26 spline to McLeod.

My question is..will the 2018 flywheel with resplined discs work with the T56? or do I have to change out the flywheel as well??

Sponsored

 

[J17GT]

Yes, it will work with the t56 magnum. You will also use your stock slave cylinder as well.

I highly recommend taking the measurements in this article to be sure the hydraulic slave is in the right place: https://www.mcleodracing.com/blog/h...-using-hydraulic-bearing-t-56t-56-magnum-/201

Mine was not and I blew the slave out on the second WOT shift. I now have a shim behind the slave and all is well. My case is not typical it seems, but best to be sure.