Steeda's New S550 Mustang Pro-Active Dampers (15-19 All)

[SteedaTech]

Thanks. I looked for it on the site but must've looked over them. I had presumed that they would've been much more expensive, so that's a good thing.

pm sent
Thank you,
Steeda Tech

Sponsored

 

[tj@steeda]

Here is the link https://www.steeda.com/steeda-555-8423-s550-front-rear-shocks-struts

$679.95!

 

[Humphammer]

I am very much interested in the new Pro-Active Dampers. I have a 2015 LE 50 Year Mustang. I have no desire to lower my ride, I just want a less bouncy harsh riding car that does not lose it's good handling characteristics. I have been thinking about purchasing the Koni's. How are the Steeda's different from the Koni's? Are these dampers all I need or would I need to change springs or shock mounts to my stock set-up to make the Steeda's achieve my goals? Thanks!

 

[rum_punch_ruby]

Very nice. I'll be swithing to these paired with the progressives next year as I edge closer to FI when my 3/36 is up.

 

[Condor1970]

So, which will provide a better daily highway drive with the Active dampers?

- Minimum Drop 1/2" Linear Springs, or...

- Sport Progressive 1-1.125" springs?

 

[SteedaTech]

So, which will provide a better daily highway drive with the Active dampers?

- Minimum Drop 1/2" Linear Springs, or...

- Sport Progressive 1-1.125" springs?

Sport Progressive. If the drop is a concern the MInimum Drop works great too.

Steeda Tech

 

[HoosierDaddy]

I am very much interested in the new Pro-Active Dampers. I have a 2015 LE 50 Year Mustang. I have no desire to lower my ride, I just want a less bouncy harsh riding car that does not lose it's good handling characteristics. I have been thinking about purchasing the Koni's. How are the Steeda's different from the Koni's? Are these dampers all I need or would I need to change springs or shock mounts to my stock set-up to make the Steeda's achieve my goals? Thanks!

Bump

 

[Humphammer]

Bump

He answered my question with a PM......here it is.

New Pro-Active Dampers adjusts while you drive to different road surfaces for driver comfort. Yes, they will work great with production spring rates. Steeda's valving is a little more aggressive than the Koni towards handling .

Steeda Tech

 

[spectremotorsports]

@SteedaTech If I were to purchase these alongside the minimal drop springs, would it be a noticeable handling improvement over the stock GTPP suspension setup?

 

[tj@steeda]

Hello Wes,

Based on the feedback I have received from our team who has tested these - yes, like mentioned above, the new Pro-Active Dampers adjusts while you drive to different road surfaces for driver comfort - they are intended to outperform stock set-up.

Send me your contact info to [email protected] & I can put you in contact with Jigar or Brian - they have been instrumental in helping with the testing & bring these bad boys to market.

TJ

 

[tj@steeda]

As a follow-up, we just had a customer install them with his progressive springs ... he praised his set-up with Progressives.

We should see some more great reviews coming in!

TJ

 

[Condor1970]

As a follow-up, we just had a customer install them with his progressive springs ... he praised his set-up with Progressives.

We should see some more great reviews coming in!

TJ

tj, I'm hoping to be getting a full set of Actives here in the next couple weeks. When I order a full set of Progressives with Actives, billet mounts, camber plates, and blue bump stops (dust covers?)... I assume they come assembled for more of a plug an play installation?

 

[rum_punch_ruby]

tj, I'm hoping to be getting a full set of Actives here in the next couple weeks. When I order a full set of Progressives with Actives, billet mounts, camber plates, and blue bump stops (dust covers?)... I assume they come assembled for more of a plug an play installation?

They do have a "make your own" suspension package on their site where you can opt to have them pre-assembled. At the moment the actives aren't an option but I assume that will change shortly.

 

[shogun32]

The 'Actives' are an option now!
https://www.steeda.com/build-suspension-kit

I emailed @Jigar@Steeda if he could clarify why the 'pre-assemble both' option is $80 more than just fronts + just rears.

 

[tj@steeda]

Sorry for the delay - just getting back on-line for the evening. Yes, they have now been added to the site. Please call Jigar at 1800 950 0774 to work with him on a package deal or you can email me at [email protected]

TJ

Sponsored