Steeda MagneRide Sport Lowering Spring Issues

[JOKER M1]

The cradle should move around pretty easy, make sure to get those bolts started by hand several threads then I usually put a socket with extension and go further by hand

Sponsored

 

[brianlh]

The cradle should move around pretty easy, make sure to get those bolts started by hand several threads then I usually put a socket with extension and go further by hand

It moves, but it's too low without a jack to thread the bolts in

 

[NGOT8R]

Remove the bolts and jack the cradle up until it’s about 1/2” from seated and then maneuver the jack as mentioned and start the bolts by hand as Joker M1 mentioned.

 

[brianlh]

Alright they're in, just threaded for the other side. I had to lay on the ground and hold the cradle with my foot while I started lifting it. I'm very glad I borrowed a good jack for this.

 

[brianlh]

And the other side is in! Thank you guys so much, you were an incredible help.

 

[NGOT8R]

And the other side is in! Thank you guys so much, you were an incredible help.

You’re welcome. Happy to help.

 

[JOKER M1]

NP, glad it came together for you.

Sponsored