Simple Grill Mod

[JOKER M1]

So I bought a used 2015 and they removed the honeycomb part of the upper and lower grill. My question is what's the easiest way to get something back in there and will I have to remove the front clip either way. Thanks.

Sponsored

 

[Nick71692]

Yes you will have to remove it regardless

 

[JOKER M1]

Yes you will have to remove it regardless

Ok, thanks. Anything special I should know when taking it off.

 

[CGADAMS]

LMR has a video on how to remove it and shows how to get the screws out they a ton of people seem to miss and end up breaking on there bumper. just follow step by step

 

[lizardrko]

Ok, thanks. Anything special I should know when taking it off.

Theres a 7mm bold in each fender after peeling back the plastic lining that needs to be removed. Some forget that and end up ripping all the plastic clips on the bumper. [ame] is the video I used to remove my bumper.

 

[JOKER M1]

LMR has a video on how to remove it and shows how to get the screws out they a ton of people seem to miss and end up breaking on there bumper. just follow step by step

Great, thanks. That's the kind of info I was looking for.

 

[JOKER M1]

Theres a 7mm bold in each fender after peeling back the plastic lining that needs to be removed. Some forget that and end up ripping all the plastic clips on the bumper. is the video I used to remove my bumper.

Great, thanks a lot. Is that the same video CGAdams mentioned, either way I'll look into it.

 

[JOKER M1]

Theres a 7mm bold in each fender after peeling back the plastic lining that needs to be removed. Some forget that and end up ripping all the plastic clips on the bumper. is the video I used to remove my bumper.

Just watched it, great video. Thanks

 

[Fryguy22]

Buy this! Helps immensely with that 7mm bolt.

https://www.amazon.com/DEWALT-DWARA...11461&sr=8-3&keywords=90+degree+drill+adapter

You'll thank me later.

 

[Chef jpd]

I have removed my bumper cover several times and I found that a 1/4" drive socket wrench with a small handle worked perfectly for that hidden fender bolt.

 

[JOKER M1]

Great, thanks everyone, been a big help.

Sponsored