How do you route rails?
In series: supply to passenger-side rail, across to driver-side rail, to regulator
That depends on which system you bought or even want.
This...That depends on which system you bought or even want.
Mikey is correct but there are other ways.
I chose the stage 2 but added a y-block and 4 extra hose fittings. The main feed line will y-block into two 8AN feeds for each rail and then both rails will have separate inputs into the regulator.
I also got the FC3 for future upgrades if I wanted to. Sending the hat back to be upgraded is 155 plus the cost of the third pump. Always leave yourself room to upgrade.
