Show Me Your Drag Setups

[Hyland33]

I'd love to see everyone's wheel and tire setup for the strip.

Sponsored

 

[Mikeg4572]

Here is mine

 

[Tweezy7]

Looks good! What's the specs ? And what springs or suspension setup ?

 

[panic]

Here is mine

This is what I'd love to fix to my GT, could you please detail rim/hoosiers measures and type? What you have in the front?

Thanks

 

[KrisR]

Racestar 17x9.5 rear with 295/45 M/Ts and 17x7 fronts with 215/60-17s. SR Performance springs (installed the day before).

This is a very nice-driving setup, easily daily-driveable if you want to. I'll just be using them for driving to, racing at, and driving home from the track. The tracks I go to are between 100-200 miles one-way from my house, so I wouldn't want the 17x4.5s for the front for those long trips.

The front wheels/tires are leftover from the 2012 GT I traded for this car, but the rears I got from a friend who wanted my 15" rear wheels/tires from my old car and he traded me these 17" rears with tires. Perfect!

 

[Mikeg4572]

This is what I'd love to fix to my GT, could you please detail rim/hoosiers measures and type? What you have in the front?

Thanks

They are Hoosier 20x17" slicks on replica cobra r wheels

http://www.oewheelsllc.com/Wheels_3...Mustang/Mustang-Cobra-Deep-Dish-Wheel-black_7

Fronts are stock PP wheels

 

[Mikeg4572]

Side view

 

[KadenW23]

Side view

is there a reason why you didn't run the 10.5" rim opposed to the 9"

 

[BMR Tech]

Billet Specialties! Love these wheels.

Thus far, this is the only car with them. But, they should be available very very very soon! I gotta test fit some new rears.

 

[Adaraas]

Billet Specialties! Love these wheels.

Thus far, this is the only car with them. But, they should be available very very very soon! I gotta test fit some new rears.

Do you drive to and from the track with the 4.5s on? I know you're based out of tampa and I've seen you at orlando before so I'm curious cause we're roughly the same distance from orlando.

Another question: Do you just use the little portable air compressor thing the cars come with to air up your tires after you're finished at the track? I'm debating just driving to the track with my 17" setup vs putting them on at the track.

 

[BMR Tech]

I drive everywhere with them.

After the track, I usually use the compressor they have there to air the tires up. Or I stop at a gas station, OR a few times I just drive home with 16.5psi int he rears. lol

 

[Adaraas]

I drive everywhere with them.

After the track, I usually use the compressor they have there to air the tires up. Or I stop at a gas station, OR a few times I just drive home with 16.5psi int he rears. lol

Alrighty dude. I might copy you and try to get a set of those to replace my 17x9.5 racestars cause I love the way those look and they're cheaper than welds

 

[Mikeg4572]

is there a reason why you didn't run the 10.5" rim opposed to the 9"

The offset with the 9" barely clears, i'm afraid the 10.5 wouldnt fit.

 

[BMR Tech]

Yeah, they are incredible!

The pics above are 17x9.5" rears. They were custom built for the car when I got it.

The new ones came in Monday, 17x10".....I just need to test fit them to confirm, and at that point, their S550 Drag Pack will be available. I am very happy to have been able to work with Billet Specialties on this project.

If you or anyone else wants these, I would call them and just say "I want the S550 Drag Pack that Kelly @ BMR has"

 

[silverstang9120]

Rts weld 17x10.5 rear and 17x4.5
Rear tires are 325/45r17 m and h
Can't wait to play with them. Waiting on twin turbo kit to come in.

Sponsored