Scooby4
Member
- Thread starter
- #1
My mustang developed a rattle in the driver door panel. After doing some research on this forum and You Tube I have implemented a fix that worked for me. Purchase a roll of 3M Window Weld Ribbon Sealer. Remove the door panel. Place a piece of ribbon sealer underneath and around the 2 nut plates the 10mm screws were removed from. I tried to tighten them by squeezing together, but upon reinstallation I would tap the door and still heard a rattle. Next, remove all the plastic retainer clips, placed some ribbon sealer in the area between the clips and the door panel retaining channel to tighten the fit. Success!
Sponsored