Procharger D1X = 8.43 @ 159

[80FoxCoupe]

ProCharger I promise to build my gen2 coyote if you give me a F1a94 head unit. I have all the pieces in place, a built 6r80 full-suspension etc....I'll even where the logo every day of my life, hows that. lol

I think they will do it if you did a full Procharger logo chest piece like Connor Mcgregor. But then you would have to be shirtless for a min of 3 yrs, for promotional purposes of course. That's in addition to the stuf you mentioned before.

Sponsored

 

[80FoxCoupe]

ProCharger I promise to build my gen2 coyote if you give me a F1a94 head unit. I have all the pieces in place, a built 6r80 full-suspension etc....I'll even where the logo every day of my life, hows that?
lol

Or...... Build your engine and run the d1x. If you end up faster than me, @turnswrench will give you his f1a94.

 

[Torinate]

ProCharger I promise to build my gen2 coyote if you give me a F1a94 head unit. I have all the pieces in place, a built 6r80 full-suspension etc....I'll even where the logo every day of my life, hows that?
lol

see! That’s the kind of dedication I’m talking about! Maybe even a nice tattoo of the Procharger logo... that’s earning that F1!

c’mon, write a couple of F1s off in the advertising budget and help these guys out. Of course, as their “free F1 Publicity Manager” there’s gotta be a kickback one for me as well!

 

[Dominant1]

I'll even do a commercial for Procharger...

 

[Torinate]

Commercial! Nice!!

can I get a Procharger face mask in my kit as well?

 

[SolarFlare]

 

[SolarFlare]

D1x is so much blower. Build the motor and use it.

 

[Dominant1]

My next mod is to ditch the factory fuel pump and bap and put my fore fuel system in. Then i’m gonna switch my 3:55’s out for 3:15’s.. then i will turn it up by replacing my 4.88 pulley with a 4.50 pulley..that should put me at about 825 whp ..thats the limit for a gen2 motor..

 

[80FoxCoupe]

My next mod is to ditch the factory fuel pump and bap and put my fore fuel system in. Then i’m gonna switch my 3:55’s out for 3:15’s.. then i will turn it up by replacing my 4.88 pulley with a 4.50 pulley..that should put me at about 825 whp ..thats the limit for a gen2 motor..

315? Why!

 

[Dominant1]

3:15’s will make better use of my 6r80’s 1st gear. With 3:55’s my 1st gear is useless especially on the street where i spend most of my time thrashing the car. I don’t run at the track that much at all.

 

[80FoxCoupe]

3:15’s will make better use of my 6r80’s 1st gear. With 3:55’s my 1st gear is useless especially on the street where i spend most of my time thrashing the car. I don’t run at the track that much at all.

Gotcha. What tire you run on the street? The 315 will absolutely slow u down at the track.

 

[Dominant1]

Gotcha. What tire you run on the street? The 315 will absolutely slow u down at the track.

Mickey Thompson street ss's 285/35/19's...

 

[SolarFlare]

3.55 is a solid centri rear gear. Going to 3.31 would help me doing 40-50 gear rolls but would bring down my trap rpm down. So I’m sticking with 3.55 for now.

 

[Bmaughan]

I’m running 3.73... I’ve considered swapping but I can’t decide. I only drive on the street so 1st and second are kinda useless....

Mickey Thompson street ss's 285/35/19's...

what size wheels?

 

[80FoxCoupe]

Pick the gear that will meet your needs

Sponsored