PP2 part #s needed

[Myshelby3425]

Looking for the PP2 part numbers on the parts below but none of the online schematics show 2018 parts. Can anyone help me on these?

PP2 spoiler
PP2 Chin spoiler
PP2 Belly pan/air deflector

Sponsored

 

[Infidex]

I may give you some wrong parts but can send you on the right trail. Go to Fordparts.com and put in 2018 Mustang for the vehicle and search for this part number.

Everything on PP2 should show Platinum Performance in the description (this is what I found running my PP2 VIN in the system)


17D957

The red chin spoiler is the PP2, this part number may not be that part, but it will bring it up and you can do some digging or show to dealer if you want to order.

17626

This may be the rock guard.

 

[Infidex]

BTW, I have not been able to find P/N for the rear spoiler yet.

 

[tripp]

I'm 100% sure, because I can't find a PP2 VIN to check this against, but I think the front chin spoiler is serviced as two pieces: JR3Z 17626-AA and JR3Z-17D957-CA plus some hardware numbers. The rear spoiler should be JR3Z-6344210-AA. And the belly pan is JR3Z-17626-B.

Again, not 100% sure without a PP2 VIN to decode.

 

[Myshelby3425]

I may give you some wrong parts but can send you on the right trail. Go to Fordparts.com and put in 2018 Mustang for the vehicle and search for this part number.

Everything on PP2 should show Platinum Performance in the description (this is what I found running my PP2 VIN in the system)


17D957

The red chin spoiler is the PP2, this part number may not be that part, but it will bring it up and you can do some digging or show to dealer if you want to order.

17626

This may be the rock guard.

Thanks. Yea, i tried on there and it’s just so poorly setup. You can understand which part is correct.

 

[Myshelby3425]

I'm 100% sure, because I can't find a PP2 VIN to check this against, but I think the front chin spoiler is serviced as two pieces: JR3Z 17626-AA and JR3Z-17D957-CA plus some hardware numbers. The rear spoiler should be JR3Z-6344210-AA. And the belly pan is JR3Z-17626-B.

Again, not 100% sure without a PP2 VIN to decode.

Pricing is crazy. Here is a PP2 vin I picked up from the dealer.

 

[sigintel]

How bout PP2:
Front spindel/knuckles
Bearing
Suspenion links

Whats different in PP2 suspension parts vs PP1?

 

[tripp]

Pricing is crazy. Here is a PP2 vin I picked up from the dealer.

This is a PP2 VIN, correct? If so, all of my above part numbers are correct.

 

[wildcatgoal]

Considering the chin spoiler for the '16 PP is like $500-600, are you sure you want to head down this path? Haha.

 

[tripp]

I'm interested in how it turns out actually. I'm curious if the 2018 chin spoiler and belly pan will bolt up to a 15-17 with no fuss.

 

[Myshelby3425]

This is a PP2 VIN, correct? If so, all of my above part numbers are correct.

Yep PP2. For the Chin spoiler numbers, doesn’t it use a GT PP chin then the added 2nd chin?

 

[tripp]

Yep PP2. For the Chin spoiler numbers, doesn’t it use a GT PP chin then the added 2nd chin?

No, the PP1 VINs I have checked use part number JR3Z-17D957-BA, whereas the PP2 VIN uses JR3Z-17D957-CA and JR3Z-17626-AA.

 

[tripp]

Also, looking at diagrams for the front end pieces, I don't think it's possible to mount the 18 stuff to a 15-17 without modifying the 15-17 car and the new pieces. Some of the mounting points are different, and the shapes are different enough that I don't think everything will go together without trimming. I'd love to be proven wrong though, cause that PP2 front lip is neat-o.

 

[Myshelby3425]

Also, looking at diagrams for the front end pieces, I don't think it's possible to mount the 18 stuff to a 15-17 without modifying the 15-17 car and the new pieces. Some of the mounting points are different, and the shapes are different enough that I don't think everything will go together without trimming. I'd love to be proven wrong though, cause that PP2 front lip is neat-o.

Yea this would be going on a base 18 gt. Shapes are totally off for 15-17.

 

[tripp]

How bout PP2:
Front spindel/knuckles
Bearing
Suspenion links

Whats different in PP2 suspension parts vs PP1?

Only the Shelby has different spindles or hubs listed.

Sponsored