Sponsored

PCM and BCM communication loss

Dtot79

New Member
Joined
Jul 14, 2020
Threads
1
Messages
3
Reaction score
2
Location
Potosi, wi
Vehicle(s)
2020 Mustang GT
My 2020 gt auto lost power to most accessory and wont even attempt to crank. ran when i parked it in a buddys shop, stone dead 2 hours later trying to start it up to leave. start button flashes rapidly but wont turn on accessory or crank. keyfob wont work but i can manually lock and unlock doors and roll up windows ect. radio doesnt work. code reader says "cant communicate with PCM and BCM"
Sponsored

 

Falk03

Well-Known Member
Joined
Aug 9, 2017
Threads
5
Messages
294
Reaction score
111
Location
Munich, Germany
First Name
Falk
Vehicle(s)
Mustang Convertible
Battery? If the battery is too low/weak, this can happen.
 
OP
OP

Dtot79

New Member
Joined
Jul 14, 2020
Threads
1
Messages
3
Reaction score
2
Location
Potosi, wi
Vehicle(s)
2020 Mustang GT
so just incase anyone else runs into this, there is a BCM connector in the passenger footwell right at the upper edge of the carpet next to the firewall grommet. Aparently mine was not latched from the factory, or came unlatched somehow and worked itself like a quarter inch loose. plugged back in, cleared codes, all is good
Sponsored

 
 








Top