Official RTR Tech 7 Install Thread!

[WildHorses]

Wish I had known about a discount when I ordered mine. Ffffuuuuuu

If you are trying to be serious with your "fffuuuu" there is no need to be a child about this.

If you are complaining about not "knowing" about a discount. You could of easily went to any of the vendor sections on this forum and see if they had a post/offer about a discount.

For instance, look at one of the top posts in the AM Section http://mustang6g.com/forums/forumdisplay.php?f=160

Then you would of saw a thread about how to obtain a discount code.

Sponsored

 

[bltslp]

If you are trying to be serious with your "fffuuuu" there is no need to be a child about this.

If you are complaining about not "knowing" about a discount. You could of easily went to any of the vendor sections on this forum and see if they had a post/offer about a discount.

For instance, look at one of the top posts in the AM Section http://mustang6g.com/forums/forumdisplay.php?f=160

Then you would of saw a thread about how to obtain a discount code.

Wow. I make a simple comment about not knowing there was a discount code after making an expensive purchase and your response is me being childish? It was a response to finding out after the fact of a discount. Was it my fault for not searching for a discount prior to purchasing them, sure. Does that not give me the right to vent a tiny bit on the Internet for this? I didn't insult anyone. I didn't call anyone names or say they had a bad company. I simply put "fffuuuuu" because it sucks. Now go be offended by someone else's post.

 

[kroy11]

Wow. I make a simple comment about not knowing there was a discount code after making an expensive purchase and your response is me being childish? It was a response to finding out after the fact of a discount. Was it my fault for not searching for a discount prior to purchasing them, sure. Does that not give me the right to vent a tiny bit on the Internet for this? I didn't insult anyone. I didn't call anyone names or say they had a bad company. I simply put "fffuuuuu" because it sucks. Now go be offended by someone else's post.

Don't let him bother you, there is always someone that gives theirselves the title of thread police on forums just ignore it Lol. :dnftt:

 

[Screwdgie]

Just when I thought I had finally picked out what wheels I am going with, I see this thread. Hmm...

 

[kroy11]

Just when I thought I had finally picked out what wheels I am going with, I see this thread. Hmm...

I was in the same boat, needless to say I had these ordered the next day lol

 

[AMAlexLazarus]

Do they have these in 18?

Nope, apparently the other diameter to be released are 20's. No mention of 18's.

This is correct gents - 20's will be happening but I've yet to hear anything about an 18" in the works. If anything you guys will definitely be the first to hear about them!

Wish I had known about a discount when I ordered mine. Ffffuuuuuu

[MENTION=21194]bltslp[/MENTION] - Shoot me a PM and I'll get you set up for your next order - I was out ill yesterday so there "might" be one from you in there

There's quite a few and I'll be working through them all morning fellas!

Alex

 

[AMAlexLazarus]

Quoted for the picture alone. One of my favorite movies.

(You and me both!) I have a sick sense of humor which should be evident by the amount of memes/gifs that I post here. I like to keep things lively, ya know?

Im still wondering how these gunmetals will look on Guard, I suspect it will look awesome.

I too would suspect that they would be ridiculously good looking!

How is the matte finish to clean? Does it have a matte clearcoat over it or is it all color paint. Does it show any weird smudges or anything? Sorry never had experience with anything other than polish metal finishes.

It's really not that bad. I haven't cleaned these exact wheels yet per-say but having had charcoal on past cars: Microfiber and Meguiars quick detailer does the trick.

Alex

 

[Screwdgie]

Hmmm black or charcoal on DIB..?

 

[Shouldhavegotthegt]

Someone needs to do 19x10.5 all the way around and post it in the aggressive wheel thread.

 

[kroy11]

Hmmm black or charcoal on DIB..?

The way I look at it, you should go charcoal because if your not wild about it, you can always dip them or have them powder coated black cheaper than you could trying to get the same charcoal finish

And I think your gonna like the charcoal

 

[UOP Shadow]

When is silver going to be an option?

 

[Screwdgie]

Probably a dumb question, but these will work with oem lug nuts right?

 

[Cascadia_302]

Probably a dumb question, but these will work with oem lug nuts right?

Not a dumb question, but if you would have taken a minute of your time you would have found the answer to your question just two pages prior where it was stated that you can use the stock lug nuts with these wheels.

 

[Screwdgie]

Thanks... not sure how I missed that

 

[kroy11]

Thanks... not sure how I missed that

Yeah I threaded mine up snug because I was going to see which I liked better the silver oem or the black lugs I got from AM, I didn't torque them down but they didn't seem like they were going to be an issue

Sponsored