New SVE Wheels

[Bob_Whit]

Now that the black SVE GT350 wheels are available in 10" front & 11" rear, I've a couple questions for wheel people.

The fronts have a +40mm offset, will this fit with 275s on without rubbing?

The rears have a +50mm offset, will these fit with 305s without rubbing?

I have a 2016 GTPP with Steeda progressive springs. If these work, I'm buying because I hate cleaning the stock PP wheels.

Sponsored

 

[Paul@PKAUTODESIGN]

Now that the black SVE GT350 wheels are available in 10" front & 11" rear, I've a couple questions for wheel people.

The fronts have a +40mm offset, will this fit with 275s on without rubbing?

The rears have a +500mm offset, will these fit with 305s without rubbing?

I have a 2016 GTPP with Steeda progressive springs. If these work, I'm buying because I hate cleaning the stock PP wheels.

The fitment will work fine on the platform with the tires you have in mind brotha, and the drop.

 

[BmacIL]

Related, [MENTION=27078]Paul@PKAUTODESIGN[/MENTION], how close would the SVE Drift 18x10 (+43 mm) be with a 275/40R18 tire? I will have the Steeda dampers on the car, if that changes anything.

 

[Paul@PKAUTODESIGN]

Related, [MENTION=27078]Paul@PKAUTODESIGN[/MENTION], how close would the SVE Drift 18x10 (+43 mm) be with a 275/40R18 tire? I will have the Steeda dampers on the car, if that changes anything.

The fitment checks out to be fine, tire specs are fine, the width is fine, diameter is fine since you have a GT, The only thing is I normally run a ET35-40 but I believe this offset works fine as well in regards to strut clearance and such.

 

[BmacIL]

The fitment checks out to be fine, tire specs are fine, the width is fine, diameter is fine since you have a GT, The only thing is I normally run a ET35-40 but I believe this offset works fine as well in regards to strut clearance and such.

Ok thanks. If need be, I could run a small spacer up front. If you have anything else in 18x10 that's near these from a price perspective, I'd love to hear it

 

[Paul@PKAUTODESIGN]

Ok thanks. If need be, I could run a small spacer up front. If you have anything else in 18x10 that's near these from a price perspective, I'd love to hear it

Max size for a spacer for safest turns is a 5 mm just a heads up there.

Whats these going for I can check and see what other options there are.

 

[boardkat]

Related, [MENTION=27078]Paul@PKAUTODESIGN[/MENTION], how close would the SVE Drift 18x10 (+43 mm) be with a 275/40R18 tire? I will have the Steeda dampers on the car, if that changes anything.

i know you have the 300A, but for those lurking in this thread with the PP, the barrel on the sve drift does *not* clear the front brembos.
the new 19x11 seems interesting - great price, and not overly heavy. flow formed to boot! definitely considering a set to run on the street in tandem with a 305 RE71R or PSS.

 

[Paul@PKAUTODESIGN]

i know you have the 300A, but for those lurking in this thread with the PP, the barrel on the sve drift does *not* clear the front brembos.
the new 19x11 seems interesting - great price, and not overly heavy. flow formed to boot! definitely considering a set to run on the street in tandem with a 305 RE71R or PSS.

Whats the offset they are using ?

Correct the PP caliper is taller so it requires a high disk barrel there are only a few options in 18" that work properly.

 

[BmacIL]

Max size for a spacer for safest turns is a 5 mm just a heads up there.

Whats these going for I can check and see what other options there are.

They're about $169 a wheel. I know that's on the very low end of anything you usually work with. Their 19x9.5 set of four at $620 and 27 lbs ea is a compelling deal for some budget summer/occasional auto-x wheels.

 

[ForTehNguyen]

if you want to do a square setup youll need +40

 

[Paul@PKAUTODESIGN]

They're about $169 a wheel. I know that's on the very low end of anything you usually work with. Their 19x9.5 set of four at $620 and 27 lbs ea is a compelling deal for some budget summer/occasional auto-x wheels.

Thats a pretty solid price brotha.

Sponsored