New cold air kit from PMAS No tune required.

[re-rx7]

Its a v2. The IAT plug is under. It runs okay, can't tell much of a difference honestly

That would be a resounding HELL YES! Sound and performance. The best test was letting the wife drive it before and after without telling her i did anything.

She screamed and was like "what the hell did you do to my car?"

Probally the noise.

Add me to the list of feeling a considerable difference from stock.

Still running my V1 kit!

Jayme I updated post 2

So many different reviews.

Sponsored

 

[aggieStang]

Re-rx7 i understand your skepticism but she had the stereo cranked

 

[re-rx7]

Intake is still audible on my car without the soundtube and i have the stock intake. Some say huge diff some say cant tell. BEen about 50/50. If you are happy thats what counts.

 

[Jayme]

^^^ Jayme did u have a cold air prior to this? Any engine lights or anything quirky?

No, just a green filter in the stock box. Nothing quirky.

 

[re-rx7]

No, just a green filter in the stock box. Nothing quirky.

I appreciate your review. :cheers:

 

[Jayme]

Well, I guess i lied. There is one quirk.. when you remote start it, it always dies.... like chokes out. Not cool.

 

[aggieStang]

Well, I guess i lied. There is one quirk.. when you remote start it, it always dies.... like chokes out. Not cool.

Just tried mine. No problem on mine. Did you do a good break in after install

 

[Jayme]

I followed the instructions and let it idle 30 secs, etc.. what other break in is there? ?

 

[aggieStang]

I followed the instructions and let it idle 30 secs, etc.. what other break in is there? ?

None on the instructions so i did the old ford break in from 08

 

[Jayme]

Please share

 

[aggieStang]

1. With the vehicle at a complete stop, set the parking brake.
2. Put the gearshift in P (Park), turn off all accessories and start the
engine.
3. Run the engine until it reaches normal operating temperature.
4. Allow the engine to idle for at least one minute.
5. Turn the A/C on and allow the engine to idle for at least one minute.
6. Release the parking brake. With your foot on the brake pedal and with
the A/C on, put the vehicle in D (Drive) and allow the engine to idle for
at least one minute.
7. Drive the vehicle to complete the relearning process.
• The vehicle may need to be driven 10 miles (16 km) or more to
relearn the idle and fuel trim strategy along with the ethanol content
for flexible fuel vehicles.
• If you do not allow the engine to relearn its idle trim, the idle quality
of your vehicle may be adversely affected until the idle trim is
eventually relearned.
• For flexible fuel vehicles, if you are operating on E85, you may
experience poor starts or an inability to start the engine and
driveability problems until the fuel trim and ethanol content have been
relearned.

 

[Jayme]

1. With the vehicle at a complete stop, set the parking brake.
2. Put the gearshift in P (Park), turn off all accessories and start the
engine.
3. Run the engine until it reaches normal operating temperature.
4. Allow the engine to idle for at least one minute.
5. Turn the A/C on and allow the engine to idle for at least one minute.
6. Release the parking brake. With your foot on the brake pedal and with
the A/C on, put the vehicle in D (Drive) and allow the engine to idle for
at least one minute.
7. Drive the vehicle to complete the relearning process.
• The vehicle may need to be driven 10 miles (16 km) or more to
relearn the idle and fuel trim strategy along with the ethanol content
for flexible fuel vehicles.
• If you do not allow the engine to relearn its idle trim, the idle quality
of your vehicle may be adversely affected until the idle trim is
eventually relearned.
• For flexible fuel vehicles, if you are operating on E85, you may
experience poor starts or an inability to start the engine and
driveability problems until the fuel trim and ethanol content have been
relearned.

I'll do this procedure this evening, Thank you.

 

[Jayme]

It started fine this morning 3 times. I will say after my butt dyno reset, I did notice a nice midrange bump, seems it makes the car more predictable and easier to drive if that makes any sense.

 

[cobra199711]

Jayme have u dyno your car before the install? Or any strip time? Trying to gauge what this intake adds....

Sent from my SAMSUNG-SM-G925A using Tapatalk

 

[Jayme]

No and no. I did log a 0-60 time before and after and it was exactly the same.

Sponsored