**NEW** Airlift Controller Mount!!

[ben@fatfab]

Thanks to Z06psi for putting together a group buy for the new Air Lift 3P Controller mount. This is like our boost controller mounts and installs in the coin tray in front of the shifter. Its a 3d printed plastic part, comes with the mounting hard ware to make it an easy install.

I have a few extra on this first run that will ship tomorrow! So if you want to grab one head over to our website and place your order.

https://www.fathousefab.com/product/airlift-3p-controller-mount/

Sponsored

 

[ben@fatfab]

Here are a few more pics, now in stock!

Everyone that pre-ordered, your order is shipping today!

 

[zuki_dan]

I received my mount today and took about 10 minutes to install the mount including gather and putting tools away. I pushed the mount as far forward as possible then tightened the screws. No problem reaching the bottom buttons.

It does block the opening/closing of the power port door/flap. I left mine closed, I don't ever use it anyway and there is another in the console if I really need it. It will also work if you leave it open. USB cable clears just fine.

I have attached some cell pics, the controller lights and overhead lights kept causing some glare in the pics.

 

[z06psi]

Looks great Dan and thanks for sending your controller in. :cheers:

Thanks to Ben for doing this for us. :cheers:


Win, win, win all around.

 

[rum_punch_ruby]

fits the space and controller well. now no more controller stuck to the console next to the radio :cheers:

 

[ben@fatfab]

Glad they are working out well for you guys!

If you open the AC power adapter door before you install the mount you should still be able to plug a car charger into the port if its a small body one.

 

[Rabid74]

Anyone have one of these they want to sell ?

 

[ben@fatfab]

Anyone have one of these they want to sell ?

I have them in stock ready to ship ;)

 

[Rabid74]

How much shipped to 33063?

 

[ben@fatfab]

https://www.fathousefab.com/product/airlift-3p-controller-mount/

You can order directly from there. Shipping is typically $15-20

 

[z06psi]

I love mine. Modified the back of it for the cable to go through so you do not see any cable at all.

This worked out great!

 

[Rabid74]

I placed the order hopefully you guys can get it shipped out today.

 

[Rabid74]

Any pics of how you modified it to hide the cables ?

 

[z06psi]

Any pics of how you modified it to hide the cables ?

Not really. Just cut out the back until you get what you want. Bought a 90 degree USB cable and once you have that just start cutting.

 

[Rabid74]

Thanks !

Sponsored