My custom toggle switches: Project for base model

[pumxee]

I suggest using krylon products as it will stick very well to the nylon material that the toggles are made of. If you want to do silver then you will have to lay down a base coat of white or grey first and then your final coat can be the silver.

What about this one?
http://www.rona.ca/en/dual-2-in-1-primer-and-paint-14495308?catalogId=10051&langId=-1&storeId=10151

Sponsored

 

[zackmd1]

What about this one?
http://www.rona.ca/en/dual-2-in-1-primer-and-paint-14495308?catalogId=10051&langId=-1&storeId=10151

That should work well for black. If you want to go silver it is important to keep in mind that most silver paints are somewhat transparent. So a black background will give you a very dark silver finish. A grey or white base will give you a brighter silver finish.

 

[Troubleman313]

New picture

so is there a picture of an installed product? If I can see that...$$$

 

[zackmd1]

This is the standard Black strong and flexible material. The top pictures are of revision 1. The bottom is a representation of revision 2, the difference being a better illumination design.

 

[magnetticmadness]

would these be useable on the premium toggles? could i swap those for these? cuz in my opinion these are alot nicer!

Sponsored