Mounting NGauge in dash

[Jeff_oddo]

Literally took 10 min to take the dash off and install the gauge.

Sponsored

 

[zaquhree]

Make sure you tilt it right or you won't be able to see it effectively

 

[Jeff_oddo]

Damn... I broke 2 of the blue clips. I'm trying to find the clips on the ford parts website and have had no luck. I just wrapped some electrical tape around the clip and pressed it in and so far it's snug... But would rather replace the clips

 

[LETHAL]

Love that center mount set up!

 

[Ultrakla$$ic]

I ordered my Ngauge/tune yesterday. I like this.

Did you just wrap electrical tape around the whole circumference of the gauge and press it in the center hole?? Does if feel like it could fall out??

 

[NewTekBuzz]

I ordered my Ngauge/tune yesterday. I like this.

Did you just wrap electrical tape around the whole circumference of the gauge and press it in the center hole?? Does if feel like it could fall out??

I did not use tape, I used a drop of gorilla glue on the back side.

 

[GTBOB]

I have the NGauge mounted in the center vent and it is hard to see during the day. I might try moving it over one.

 

[NewTekBuzz]

Yeah it's really hard to se in the day time, almost need a shade that sticks out about an inch or 2. Moving it to the drivers side will not help

 

[02blackgt]

Change your gauge display color to white and it will really help with being able to see it better during the day

 

[Ultrakla$$ic]

I did not use tape, I used a drop of gorilla glue on the back side.

Thanks for the quick reply!:cheers:

 

[Jeff_oddo]

Anyone know where to find the part number for these blue clips that go on the back side of the dash trim? A few of mine broke and all I'm seeing is the actual dash in the ford parts online page, not the clips. Any help would be greatly appreciated!

 

[Ultrakla$$ic]

Sometimes you can go to Advance Auto and they have a rack with all kinds of OEM clips and gadgets.

 

[02blackgt]

I haven't picked these up yet but I had this part number bookmarked for the clips.

W717661S300 comes in a package of 4

 

[Jeff_oddo]

I haven't picked these up yet but I had this part number bookmarked for the clips.

W717661S300 comes in a package of 4

Dude you are the man! Lol. I wrapped some damn electrical tape around the clip and pressed the dash piece in and it fits, but not like stock

 

[NicksRubyRed15GT]

are you able to get the SD card in and out without any problems with it mounted in the dash?

Sponsored