Molex Harness Users

[billross77]

You guys that have used the Molex connectors to make a harness for the speaker wires...what gauge wire did you use? I am afraid that 18 or 16 gauge would be too big to solder to the pins.

Sponsored

 

[Racemaster]

Bill,check out the way I did it.I used a breadboard and mounted it in a plastic enclosure.

http://www.mustang6g.com/forums/showthread.php?t=58862&highlight=audio

 

[billross77]

Holy crap that looks hard. I am interested in how you used the remote relay. Which wires plugged in?

 

[Racemaster]

In the same plug as the mid/tweeter connections there is a 12 volt wire,
a ground,and a remote turn-on lead.The problem is ford used 6 volts for the turn-on instead of 12.The pac TR-4 gets triggered from the 6 volt and uses the 12 volt as the output.

 

[billross77]

I was planning on using the Blue/White wire from the rear harness in the trunk, but I am wondering if that will still be available after I create the molex harnesses for the speakers.

Sponsored