Mach 1 update

[JFALK68]

Full ppf, ceramic tint, ceramic coating, stripes for hood, over the top and deck lid. Orange stripes for splitter and side skirt rocker splitters installed. Mach 1 overlays. Engine coil cover overlays. Strut tower brace overlay. Diffuser pin stripping.

Sponsored

 

[Charlemagne]

Where did you get these overlays? I need them too (in original colour) because my letters were made invisible by PPF. Thanks

 

[JFALK68]

BEMARO INC.

here’s a screen shot.

 

[Charlemagne]

BEMARO INC. here’s a screen shot.

So you used the fender emblems overlays to cover the hood logo and it matches the size of the letters exactly?

 

[superspartan]

where did you get those bumper orange decals ?

 

[JFALK68]

So you used the fender emblems overlays to cover the hood logo and it matches the size of the letters exactly?

No. They actually came with the rocker panel stripes from Auto Design shop. I had to remove all of my decals for ppf install.

 

[JFALK68]

where did you get those bumper orange decals ?

BEMARO Industries

 

[superspartan]

BEMARO Industries

Is it this one? https://www.bemarofilms.com/product-page/r-splitter-pinstripe

Mind you, I have the regular front splitter not the handling pack. Will they fit?

 

[JFALK68]

Good question. I did not install them, I had the shop that did my PPF on my car install the decals. You might be able to reach out to them by email. Originally I was just going to do the top part of the splitter not the bottom part and the gentleman that did my car did not like it there so he moved it down to the bottom, that splitter is bigger so I would believe it would fit the upper portion.

 

[JFALK68]

I ordered specifically Mach 1 splitter decals.

 

[superspartan]

Good question. I did not install them, I had the shop that did my PPF on my car install the decals. You might be able to reach out to them by email. Originally I was just going to do the top part of the splitter not the bottom part and the gentleman that did my car did not like it there so he moved it down to the bottom, that splitter is bigger so I would believe it would fit the upper portion.

Right, I'm confused about the colors though, there is Orange Fury and Competition Orange. Which one is closer or the same as the orange lines on the hood and rest of the car?

 

[Wingnutzz]

Absolutely beautiful. FIRST CLASS!!!

 

[JFALK68]

Right, I'm confused about the colors though, there is Orange Fury and Competition Orange. Which one is closer or the same as the orange lines on the hood and rest of the car?

I chose the reflective orange from the drop down menu. There is also a selection for a custom color. I ordered the Mach 1 ground effects kit. It is reflective orange. Matches pretty close to the oranges on the stripes, brake calipers and on the hood and rocker panels. It’s appears a little darker in low light situations. Pretty cool at night when light hits it. It reflects the ground color for example, it appears darker on my asphalt driveway. But in my garage with the led lighting it matches pretty close. Here’s what I ordered.
https://www.bemarofilms.com/product-page/mach-1-ground-effects-kit

 

[JFALK68]

Absolutely beautiful. FIRST CLASS!!!

Thanks I do love it.

 

[DarthMalice]

Damn...that is some first class, tasteful upgrading. Well done.

Sponsored