Mach 1 update

[JFALK68]

Thanks appreciate that

Sponsored

 

[Helsinki]

Full ppf, ceramic tint, ceramic coating, stripes for hood, over the top and deck lid. Orange stripes for splitter and side skirt rocker splitters installed. Mach 1 overlays. Engine coil cover overlays. Strut tower brace overlay. Diffuser pin stripping.

Hey man, are the vinyls OEM quality?

 

[JFALK68]

Hey man, are the vinyls OEM quality?

Yes sir. Believe it or not I had a sign fall and hit the hood of the car. Ppf did its job protecting the paint. Had to take it back to the shop to have pdr done and ppf and a new decal. The first decal was brown looking not black and the anthracite was wavy looking. The installer and I didn’t notice it until the car was out in the sun unfortunately. I ordered a new set haven’t seen it yet but I requested they check the printing before sending it to me. Hopefully my installer is happy with it. It was a perfect match for the one that was removed for ppf. To order it from Ford it was $745 just for the hood stripe.

 

[Helsinki]

Yes sir. Believe it or not I had a sign fall and hit the hood of the car. Ppf did its job protecting the paint. Had to take it back to the shop to have pdr done and ppf and a new decal. The first decal was brown looking not black and the anthracite was wavy looking. The installer and I didn’t notice it until the car was out in the sun unfortunately. I ordered a new set haven’t seen it yet but I requested they check the printing before sending it to me. Hopefully my installer is happy with it. It was a perfect match for the one that was removed for ppf. To order it from Ford it was $745 just for the hood stripe.

Good to know! I may be ordering a set soon enough.

 

[astronaut45]

Yes sir. Believe it or not I had a sign fall and hit the hood of the car. Ppf did its job protecting the paint. Had to take it back to the shop to have pdr done and ppf and a new decal. The first decal was brown looking not black and the anthracite was wavy looking. The installer and I didn’t notice it until the car was out in the sun unfortunately. I ordered a new set haven’t seen it yet but I requested they check the printing before sending it to me. Hopefully my installer is happy with it. It was a perfect match for the one that was removed for ppf. To order it from Ford it was $745 just for the hood stripe.

JFALK68,

That is awesome looking, I saw you ordered from autodesign and I've been looking at ordering from them as well so that I can take my Mach 1 Stripe over the roof and onto the rear like how you have it. You seem to mention here that the stripes didn't perfectly match the OEM stripe, so do you now not have the OEM stripe on the hood? Is it entirely the autodesign stripe now? And you said the Orange Mach 1 decal you have now on the hood, was part of the autodesign kit actually designed for the rocker?

Just trying to get a bit of clarification on what you have on there, because I'm eager to copy

 

[JFALK68]

The stripes are all from Auto design. I had the first factory stripe replaced after the first ppf was installed onto the entire car. Hood got a dent in it and had to have pdr, ppf replaced on hood and a new hood stripe. So they are all auto design stripes, 2nd time for hood. I don’t know if it matched the oem stripe the installer did not say it did not but looking at before and after pictures the orange is a tad bit brighter on the auto design hood stripe, over the top and deck lid as compared to the oem decal. Just for the hood stripe at Ford parts was $745. I had no choice to change all three because my ppf guy didn’t want to ppf over decals because it would leave an air space and he didn’t want to cut it along either side of the stripe. And yes the Mach 1 on the hood came with the rocker stripes which I had to replace the oem ones so they could be placed on top of the ppf. The Mach 1 overlays, splitter, rocker splitters and diffuser decals came from Bemaro corporation and they are all reflective orange and depends on the lighting sometimes they match the orange in the stripes if it’s brightly lit or appears darker then the stripes if not for example in my garage.

 

[JFALK68]

The stripes are all from Auto design. I had the first factory stripe replaced after the first ppf was installed onto the entire car. Hood got a dent in it and had to have pdr, ppf replaced on hood and a new hood stripe. So they are all auto design stripes, 2nd time for hood. I don’t know if it matched the oem stripe the installer did not say it did not but looking at before and after pictures the orange is a tad bit brighter on the auto design hood stripe, over the top and deck lid as compared to the oem decal. Just for the hood stripe at Ford parts was $745. I had no choice to change all three because my ppf guy didn’t want to ppf over decals because it would leave an air space and he didn’t want to cut it along either side of the stripe. And yes the Mach 1 on the hood came with the rocker stripes which I had to replace the oem ones so they could be placed on top of the ppf. The Mach 1 overlays, splitter, rocker splitters and diffuser decals came from Bemaro corporation and they are all reflective orange and depends on the lighting sometimes they match the orange in the stripes if it’s brightly lit or appears darker then the stripes if not for example in my garage.

Thanks I really love how it turned out. It was my installers idea to put the Mach 1 over the anthracite one.

 

[Vertex]

I chose the reflective orange from the drop down menu. There is also a selection for a custom color. I ordered the Mach 1 ground effects kit. It is reflective orange. Matches pretty close to the oranges on the stripes, brake calipers and on the hood and rocker panels. It’s appears a little darker in low light situations. Pretty cool at night when light hits it. It reflects the ground color for example, it appears darker on my asphalt driveway. But in my garage with the led lighting it matches pretty close. Here’s what I ordered.
https://www.bemarofilms.com/product-page/mach-1-ground-effects-kit

Awesome I just was looking for this and am so glad you linked it. Appreciate you!

 

[JFALK68]

Awesome I just was looking for this and am so glad you linked it. Appreciate you!

You’re welcome

Sponsored