Vroom
Well-Known Member
- Joined
- Jan 25, 2019
- Threads
- 15
- Messages
- 155
- Reaction score
- 54
- Location
- Houston, TX
- Vehicle(s)
- 2016 Mustang GT
- Thread starter
- #1
So i gave up on trying to get my 18 Manifold tune to pass with 02 and 02 heater so i swapped my intake manifold, injectors, intake, tune to stock and i got a load of engine light codes. 2 of them were just because i needed to do a crank relearn but the others seem a bit more serious and it seems like my stock tune file is messed up:
P0630 VIN not programmed or incompatible ECM/PCM.
U0422 Invalid Data received from body control module.
I've already contacted Lund's Support, but I'm impatient so i was wondering if anyone has every ran into an issue when reflashing the stock tune file. I searched and i could not find anything on this forum, only found on a couple F150s saying it was wrong tire size or some bs but i havent even driven the thing more than 10ft forward and back into garage so how can it know sense gearing. No sense in driving for drive cycles with codes, while it drives fine it fails me immediately on any smog test with engine light on.
P0630 VIN not programmed or incompatible ECM/PCM.
U0422 Invalid Data received from body control module.
I've already contacted Lund's Support, but I'm impatient so i was wondering if anyone has every ran into an issue when reflashing the stock tune file. I searched and i could not find anything on this forum, only found on a couple F150s saying it was wrong tire size or some bs but i havent even driven the thing more than 10ft forward and back into garage so how can it know sense gearing. No sense in driving for drive cycles with codes, while it drives fine it fails me immediately on any smog test with engine light on.
Sponsored