Lowering 2020 Bullitt

[tj@steeda]

Let me know if I can help assist - [email protected] if I can be of service!

TJ

Sponsored

 

[rcald]

Steeda lowering springs for Magnaride. No issues.

Looks and drives great.

Did you install the 8243 Ultimate or 8242 Progressive spring pack? Also, suggestion being maded for camber plates. Thanks!

 

[stungjoe]

I used the 8243 dual rate springs on mine. I also have 25mm front and 20mm rear slip-on spacers. I love the ride and performance. The spring rate can be a bit stiff but I usually keep the MR in sport mode. Long trips I can switch to normal mode. Spirited back road romps I have track mode. Not too much lower than stock.

 

[Sixxarp]

I went with the Eibach Pro-Kit for Magnaride plus the Camber bolts. 1.2” Front and 0.8” Rear

I absolutely love the stance it has with the addition of spacers. It does rub ever so slightly on the occasional dip/bump, but not enough to be an issue.

 

[Bulutt]

Did you install the 8243 Ultimate or 8242 Progressive spring pack? Also, suggestion being maded for camber plates. Thanks!

8242 plus rear camber plates.
https://www.mustangmotorsport.com.a...e-Sport-1-Lowering-Springs-Mustang-Motorsport

Sponsored