JMS BAP install question

[z06psi]

So I installed the JMS BAP. Everything is good but there are two ground wires that accompany the pedal connection. They are both heat shrinked over. Do they need to be hooked up to a ground? No mention of them in the instructions. Thanks in advance.

Sponsored

 

[Phils15GT]

I didn't. I just tucked them away.

 

[z06psi]

Beefcake said the same. I wonder if it is for the control knob.

Sent from my SM-N910V using Tapatalk

 

[Kryckter]

I tucked them away as well...

 

[beefcake]

For a hobbs switch

 

[z06psi]

Ahhhhh. 5v trigger.

Sent from my SM-N910V using Tapatalk

 

[D3adch1ld]

Ahhhhh. 5v trigger.

Sent from my SM-N910V using Tapatalk

Hey, Curious how you set your dip switches. Mind telling me.. I'm using 1-2 off, 3 on, 4 off, 5 on. Currently running the pedal switch, no hobbs switch.

Thanks in advance.

 

[z06psi]

All you need to know is here.


http://www.mustang6g.com/forums/showthread.php?t=20711&highlight=JMS&page=2

 

[rredd14]

bump to save for my install and settings!

 

[lsxlol]

I accidentally ordered the wrong JMS BAP I got one for a 2011-2014 car and I have a 2015 Besides the plug been different if I hardwire it will it function the same ??

 

[zaquhree]

I heatshrinked mine and ziptied them out of the way for cleanliness

 

[rredd14]

What location in the fuse box under the hood did yall install the 30amp fuse supplied with the kit?

 

[z06psi]

What location in the fuse box under the hood did yall install the 30amp fuse supplied with the kit?

15s and 16s come with a 30 amp fuse. At least mine did.

 

[arieso94z28]

I did not have to upgrade the fuse in my 15' either. Already had a 30 amp fuse.

 

[rredd14]

Thanks guys! I just wanted to be 110% sure.

Sponsored