jacking points?

[Caballito]

hey guys i need poctures of jacking point front and back on my s550 if someone has them i will really appreciate u posting them or sending to me. basically i wanna jack the front end and put jack stands on the sides and wanna do the same for the rear. thanx guys!

Sponsored

 

[BluePonyGT]

You can lift anywhere along the pinch weld, and there's 2 spots along the pinch weld on each side that's shaped to give more stiffness to hold your jack stands. You have to get down and look at the pinch weld on either side and you'll see all four spots pretty clearly.

However, if you install a set of jacking rails you can lift the whole side of the car up at once and put your jack stands on one side in place before lifting the other side. Makes doing it WAY easier. That's the first thing I bolted to the car. Steeda makes a really good set that I have (search).

 

[MaxQ]

hey guys i need poctures of jacking point front and back on my s550 if someone has them i will really appreciate u posting them or sending to me. basically i wanna jack the front end and put jack stands on the sides and wanna do the same for the rear. thanx guys!

picture as requested

 

[Roadway 5.0]

Ford installed a cheat-code...by the pinch welds are arrows molded into the plastic. You can look and/or feel for the arrows and you’ll know where on the frame to place your jack.

 

[sed6]

picture as requested

I hate those jackstand locations! I mean can you get any closer to the centerline? Nope, cause the diff and trans are in the way! The father out the stands the more stable it's gonna be. I can't wait for my Steeda jacking rails to arrive. I can jack from the center and put my stands on them too for ultimate stability and peace of mind.

 

[Caballito]

i think i didny explain myself corrrctly buy am looking for javking points in the center or front and back yo it can be easier.to put my jack stands. or maybe they dont.exist. i.didi see the pictuee posted just wanna make sure thats for a s550?

Sponsored