Is my phaser bad?

[khanks]

So last Saturday I installed opg and a crank sprocket and to do so you need to pull timing no biggie so after full reassembly I went for the first start and there was a odd noise coming from the passenger valve cover/or timing cover, so I immediately turned off the car thinking my timing was off I pulled it apart and saw my timing was perfect but just to be safe I pulled the timing again and re did and after putting it back together it had the same noise exact this time it was instant it took about 30-40 seconds for the sound to slowly become present again, so once again I pulled it apart and this time I looked at my secondary chains and phaser and found that the middle part of the passenger side exhaust phaser isn’t moving when I move the intake side, so I went to test the driver side (no noise over here btw) and everything moved together so I possible just have a bad phaser that’s causing my noise I’ll include a video from last Saturday of it running and the video I took today of the phaser all help is needed I want my car back to running properly

Sponsored