TexasRebel
Gearshifter
- Joined
- Mar 19, 2016
- Threads
- 27
- Messages
- 2,500
- Reaction score
- 836
- Location
- between the mustard and the mayo
- Vehicle(s)
- 2016 YZ GTPP - PP2
- Thread starter
- #1
Not the easiest thing I've ever done, but fairly straight forward.
The 6 1/4" measurement from the resonator body should be closer to 6 1/2. I don't think my pipes are quite straight, but I got everything tight and was tired of being wedged between chassis and concrete. We'll see how it looks in the daylight.
The sound as I came off of the ramps was nice! H-Pipe with Borla S-Types. Nice burble at idle, and not too much noise puttering around the neighborhood. Great voice when I give it a little throttle.:cheers:
The 6 1/4" measurement from the resonator body should be closer to 6 1/2. I don't think my pipes are quite straight, but I got everything tight and was tired of being wedged between chassis and concrete. We'll see how it looks in the daylight.
The sound as I came off of the ramps was nice! H-Pipe with Borla S-Types. Nice burble at idle, and not too much noise puttering around the neighborhood. Great voice when I give it a little throttle.:cheers:
Sponsored