Tomster
Beware of idiots
- Thread starter
- #106
I said enough is enough to the analysis paralysis, so today I pulled the trigger on the Schroth 4pt Profi II ASM for both driver and passenger as well as the SHR Flex HANS.I am not well informed on the safety gear at this point. Same as you, don't want to switch out the seats at this point so looking for something to work with the sofas.
I think Firestarter2 may have posted a complete setup with factory seats. Trying to get ideas about what to use during the off season so could prepare for next spring where I plan on going to more HPDE's and I'm starting to go faster.
I spoke with Mark at Schroth this AM to finally settle my concerns over a harness to be used with factory front seats in conjunction with a Watson 4 pt roll cage. As I mentioned in an earlier post, I knew that I was unable to mount a 5 or 6 point harness to the factory seat correctly. It was brought to my attention that the 4 pt Profi II ASM could be adapted to a 5 or 6 pt in any instance should any particular track require it. Although not 100% correct, it is acceptable for any tech inspection.
There are two versions of the Profi II ASM, one is the competition model and the other is the street legal version.
The competition model as seen below is the one that I ordered. The differences are the release style and the clips as opposed to bolt in eyelets for the Profi II ASM FE.
The Profi II ASM that I ordered (mine was ordered in red)
The Profi II ASM FE (street legal version -note the push button release and bolt in belt eyelets)
The SHR Flex Hans style device
So I guess I have some more early Christmas presents inbound
Sponsored