How do you remove the dash?

[derieuz]

How do you remove the dash and the aluminum trim from the car, so you can see the inside etc.

Sponsored

 

[TheNameAndy]

I need to know this as well, if anyone can help, that would be great!

 

[IvanCRF]

See the links:

I kind of go through it here:
http://www.mustang6g.com/forums/showthread.php?t=25448

...and some here:
http://www.mustang6g.com/forums/showthread.php?t=23467&page=11

To make a 100% step by step would require me to tear parts of it down again, aaaaaaand I'm not going to do that unfortunately. But, you should be able to get the idea from these two threads.

 

[TheNameAndy]

This is a good how to video:

[ame]

 

[RushGotti]

I've done it, You can start from either side.

If you start from the passenger side, You can pull most of the aluminum straight off, to expose bolts under from the rest of the things.

You can take it 1 step at a time, Like where the vents are, It's 1 big piece. Then there's another piece to the right side of the steering wheel that just pulls off.

 

[Sublimemach]

So even the left side of the dash just pops off?

 

[RushGotti]

So even the left side of the dash just pops off?

Careful, Feel it from behind first or gently pull back and if you feel it's too On the drivers side there is a couple of things to watch out for, Like clips that break easily or tabs that are connected to other pieces that must be taken off first...

Just take it easy, But yeah most of it just pops right off.

 

[Ap8823]

Its easy, i just wrapped mine in carbon fiber

Sponsored