GT500 Carbon Fiber Condenser Clips

[Tomster]

So anyway,

This was the condition of the condenser which prompted me to replace it.

Sponsored

 

[The Demon]

So anyway,

This was the condition of the condenser which prompted me to replace it.

Lots of shrapnel flying up from the track I’m assuming. That seems like a lot of damage. Just wow.

 

[Tomster]

Lots of shrapnel flying up from the track I’m assuming. That seems like a lot of damage. Just wow.

Track? Nobody said anything about driving my car on a track. That would void the warranty....

 

[WD Pro]

I guess that’s what 180 mph does to soft aluminium fins …

I bet you are happy with your decision for PPF / track armour now

WD

 

[ihasnostang]

i would of taken a picture looking down through the part and then import that picture into cad and scale based off a known overall dimension. in my case i used the cvf plaque as my known dimension. granted this example has its limitations and i was just using it as an experiment

 

[Tomster]

i would of taken a picture looking down through the part and then import that picture into cad and scale based off a known overall dimension. in my case i used the cvf plaque as my known dimension. granted this example has its limitations and i was just using it as an experiment

My CAD Kung Foo not so good.

 

[Tomster]

I guess that’s what 180 mph does to soft aluminium fins …

I bet you are happy with your decision for PPF / track armour now

WD

187 to be exact

 

[ihasnostang]

My CAD Kung Foo not so good.

feel free to message me with an HQ picture looking normal to this face if you want a 3d model of it. along with a dimension i can use to scale it. i did this quickly

 

[Tomster]

feel free to message me with an HQ picture looking normal to this face if you want a 3d model of it. along with a dimension i can use to scale it. i did this quickly

Sure, go ahead and model it to make it available to everyone. I can even provide my initial 3d scans if that helps.

I can print in carbon fiber as well on the MK4

 

[Tomster]

This can be 3D printed with carbon fiber infused filliment.

Here is the material that I would use. A file available for the masses to be publicly shared is welcomed.

Anyone want to take my scans and create a public domain file for all to use?

Here is the filliment I would use

 

[ihasnostang]

sorry, to be more clear. i need a picture of the original part looking down centered over the part, similar to how i have it shown, with the phone flat. i also need a length dimension like i drew with the green line, and also the part thickness.

Sponsored