GT350 Steering wheel

[Cloak]

will be installing mine tomorraw

Sponsored

 

[Mikeg4572]

Well I finally got mine and installed it yesterday. Levittown still has the order as processing, but there it was on my doorstep on Friday :cheers:


View attachment 43650

Some notes:
-The bottom trim piece is a pain to remove from the old wheel so make sure you have some kind of trim removal tool, or just wrap some pliers in a piece of cloth to pick it up from the bottom.
-Also the main bolt that holds the wheel clearly had some red thread-lock on it and I did not see this mentioned anywhere. Only had blue on me so I figured its good enough.
-The wheel will wobble until its completely tightened, I tightened it half way it it was very wobbly to a point that I thought something got caught in the way.

Other then that a very easy process which should take well under and hour.

How long ago did you order yours?

 

[DeepImpactGTny]

How long ago did you order yours?

August 12th

 

[Mikeg4572]

Thanks ! I'm anxious to get mine

 

[ForTehNguyen]

I received not one but TWO GT350 items today

 

[Evolvd]

Mmmm...I like me some blue cheese

 

[Dirtyblueshirt]

Mmmm...I like me some blue cheese

Points deducted for being from Pizza Hut.

 

[Khyber]

Mmmm...I like me some blue cheese

gross

 

[justinjohnson]

Did Bill reply?

Did Bill reply?

 

[ForTehNguyen]

installed it in about 40 min. Most annoying part was trying to get the clips in correctly for the left and right controls

 

[justinjohnson]

Bill - how can I get access to that video. I purchased mine from CJ and just received it today.

 

[nrothaar]

So I'm confused.. you can still order these or not? Everyone keeps saying they've been discontinued or is that just because CJ Pony Parts stopped selling them and took down their video for some reason? Waiting for the gt350r wheel but if it's getting discontinued would like to order this one instead.

 

[MagneticGT]

Yes, I was. ;)

Sorry for the delayed reply. After I got the installation complete, I had to finish installing a few other things before sending her off for the installation of my FRPP handling kit and Rohana RC7's.

Were you able to finish it up?

 

[MagneticGT]

I was going to add the same note about using a trim removal tool on the bottom trim piece. Also, a 22 mm socket was too small for my steering wheel bolt. Maybe the splines on my 22 mm socket were too coarse. I had to use a 15/16" socket and a socket extender. Then, as another member suggested, I torqued the bolt to 35 ft lbs.

-The bottom trim piece is a pain to remove from the old wheel so make sure you have some kind of trim removal tool, or just wrap some pliers in a piece of cloth to pick it up from the bottom.
-Also the main bolt that holds the wheel clearly had some red thread-lock on it and I did not see this mentioned anywhere. Only had blue on me so I figured its good enough.

 

[Zemedici]

gross

This.

Sponsored