GT350 Steering wheel

[Rickycardo]

Thanks for the pics guys. That doesn't scare me off. Looks like you just take you time and route the wires right and it's all good.

Sponsored

 

[AoAIronman]

Looking to order the gt350r wheel without the bezels for $199 from levittownfordsupercenter. Does anybody know far they are backordered?

 

[Freedom]

Looking to order the gt350r wheel without the bezels for $199 from levittownfordsupercenter. Does anybody know far they are backordered?

Was also wondering, how come the GT350R steering wheel seems so much cheaper?

 

[sloppymax]

pstang - I had the same issue on my auto install. What I found is there are two knobs on that side piece that push into the wheel. When they punched out the hole, one side of mine had the pieces punched out left inside the hole. That kept the piece from sitting flush. I used tweezers and pulled it out. The other side did not have the leftover material. After pulling it, the pieces sat perfectly flat.

 

[Rickycardo]

Looking to order the gt350r wheel without the bezels for $199 from levittownfordsupercenter. Does anybody know far they are backordered?

I have one on order from them. I called my local dealer and they think the wheels are backordered to about mid April.

 

[LevittownFordParts]

Looking to order the gt350r wheel without the bezels for $199 from levittownfordsupercenter. Does anybody know far they are backordered?

These are not expected in for 45-60 days

-Benny

 

[pstang]

pstang - I had the same issue on my auto install. What I found is there are two knobs on that side piece that push into the wheel. When they punched out the hole, one side of mine had the pieces punched out left inside the hole. That kept the piece from sitting flush. I used tweezers and pulled it out. The other side did not have the leftover material. After pulling it, the pieces sat perfectly flat.

Thanks Sloppymax, I took it apart today and re fit it, much better, my issues were definetly due to the wiring harness. much better now.
thanks

 

[AoAIronman]

These are not expected in for 45-60 days

-Benny

Do we get charged immediately when ordering or do we get charged once the part actually comes back in stock?

 

[stevnoof]

Damn I should have went with this supplier I paid $350ish waited over 2 months and didn't even unwrap the bezels. Anyone wanna buy them for a hundred and fifty bucks? Yea I didn't think so.

 

[aschaefer]

These are not expected in for 45-60 days

-Benny

Think you'll have enough come in to fill the backlog you currently have? I ordered mine about a month ago (order 7215)

 

[LevittownFordParts]

Its still and ETA but we hope that we can fill them all.

-Benny

 

[sese]

Do we get charged immediately when ordering or do we get charged once the part actually comes back in stock?

Your card will be charged right away for the full amount.

 

[aschaefer]

Installed my 350 wheel today - easy as pie.
Looking forward to getting the 350R wheel installed once it comes in.

 

[pumxee]

Guys I installed the metallic paddle shifters from cjponyparts and now I can access the airbag pins. I can't even remove the paddle shifter extension because it's pulling on the OEM shifter. How do I remove the extensions. I used double sided 3m adhesive to put them on

 

[Sammzway]

Guys I installed the metallic paddle shifters from cjponyparts and now I can access the airbag pins. I can't even remove the paddle shifter extension because it's pulling on the OEM shifter. How do I remove the extensions. I used double sided 3m adhesive to put them on

Use a hairdryer and carefully heat up the adhesive and slowly pry them off.


Sent from my iPhone using Tapatalk

Sponsored